compiler: Mark clip/cull distance arrays as compact before lowering.
nir_lower_clip_cull_distance_arrays() marks the combined clip/cull
distance array as compact. However, when translating in from GLSL
or SPIR-V, we were not marking the original float[] arrays as compact.
We should do so. That way, we can detect these corner cases properly.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
nir: Record info->fs.pixel_center_integer in lower_system_values
radeonsi uses a system value for gl_FragCoord rather than an input var.
These get translated into load_frag_coord NIR intrinsics, which lose the
pixel_center_integer and origin_upper_left decorations. To cope with
this, Tim added a shader_info field for pixel_center_integer, and made
glsl_to_nir set it accordingly.
prog_to_nir also needs to handle these fragcoord conventions. Instead
of duplicating the logic to set the info field, just move it to
nir_lower_system_values so it'll happen regardless of who makes the NIR.
(For what it's worth, we don't need an info flag for origin_upper_left,
because radeonsi lowers origin conventions in nir_lower_wpos_ytransform
before nir_lower_system_values destroys the variable and qualifiers.)
Reviewed-by: Eric Anholt <eric@anholt.net>
Some drivers, such as radeonsi, use a system value for gl_FragCoord
rather than an input variable. In this case, our Mesa IR will have
a PROGRAM_SYSTEM_VALUE register, which we need to translate.
This makes prog_to_nir work for Gallium drivers which expose the
PIPE_CAP_TGSI_FS_POSITION_IS_SYSVAL capability bit.
Reviewed-by: Eric Anholt <eric@anholt.net>
We implement the basic VS and FS, as well as the VS that does layered
clears by writing gl_Layer from the vertex shader. Drivers which need
a geometry shader for writing layer continue falling back to TGSI, as
I didn't need this and so didn't bother implementing it. (We certainly
could, however, if people want to add it in the future.)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Eric Anholt <eric@anholt.net>
st/mesa: Add a NIR version of the drawpixels/bitmap VS copy shader.
This provides a native NIR version of the DrawPixels/Bitmap passthrough
vertex shader.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Eric Anholt <eric@anholt.net>
st/nir: Make new helpers for constructing built-in NIR shaders.
The state tracker generates several built-in shaders in order to
perform scissored clears, upload/download PBOs, and so on. These
are currently constructed using TGSI, using ureg and u_simple_shader.
I want to have NIR versions of these shaders, for my Gallium driver
that has a NIR backend but no TGSI support. To that end, we'll want
a few helpers to help construct simple shaders.
This patch adds two new helpers:
- st_nir_finish_builtin_shader() takes a manually constructed NIR
shader, applies lowering passes (like st_link_nir would do for GLSL),
and constructs the pipe_shader_state.
- st_nir_make_passthrough_shader() makes a simple passthrough shader,
which copies inputs to outputs. This is similar to u_simple_shaders.
v2: Set info->fs.untyped_color_outputs for vc4/v3d (thanks Eric!).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Eric Anholt <eric@anholt.net>
st/nir: Move varying setup code to a helper function.
I want to reuse this for built-in shaders.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Eric Anholt <eric@anholt.net>
nir: Move V3D's "the shader was TGSI, ignore FS output types" flag to NIR.
Ken's rework of mesa/st builtins to NIR means that we'll have more NIR
shaders with color output types that are mismatched with the render target
types. Since this is behavior that GLSL doesn't require, add it as a
shader_info option so the driver can know that it needs to ignore the FS
output's base type in favor of the actual render target's. This prevents
needing additional variants in several mesa/st paths (clear, pbo upload,
pbo download), given that the driver already has to handle the variants
for any TGSI being passed to it (from u_blitter, for example).
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 927ba12b53 ("anv/tests: Adding test for the state_pool padding.")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com><Paste>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
nvc0/ir: replace cvt instructions with add to improve shader performance
gives me an performance boost of 0.2% in pixmark_piano on my gk106, gm204 and
gp107.
reduces the amount of generated convert instructions by roughly 30% in
shader-db.
v2: only for 32 bit operations
move some common code out of the switch
handle OP_SAT with modifiers
v3: only for registers and const memory
rework if clauses
merge isCvt into this patch
v4: merge isCvt into its use
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
When Mesa is compiled for gallium-xlib using e.g.
./configure --enable-glx=gallium-xlib --disable-dri --disable-gbm
-disable-egl
and is used by an X server (usually remotely via SSH X11 forwarding)
that does not support MIT-SHM such as XMing or MobaXterm, OpenGL
clients report error messages such as
Xlib: extension "MIT-SHM" missing on display "localhost:11.0".
ad infinitum.
The reason is that the code in src/gallium/winsys/sw/xlib uses
MIT-SHM without checking for its existence, unlike the code
in src/glx/drisw_glx.c and src/mesa/drivers/x11/xm_api.c.
I copied the same check using XQueryExtension, and tested with
glxgears on MobaXterm.
This issue was reported before here:
https://lists.freedesktop.org/archives/mesa-users/2016-July/001183.html
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: <mesa-stable@lists.freedesktop.org>
loader/dri3: Use strlen instead of sizeof for creating VRR property atom
sizeof counts the terminating null character as well, so that also
contributed to the ID computed for the X11 atom. But the convention is
for only the non-null characters to contribute to the atom ID.
Fixes: 2e12fe425f "loader/dri3: Enable adaptive_sync via
_VARIABLE_REFRESH property"
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
nir: add missing vec opcodes in lower_bool_to_float
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
mesa: release references to image textures when a context is destroyed
When a texture is still bound as an image and the context it was bound in
is destroyed but not the texture, then the texture will still hold the
resource and will not be freed when it is finally destroyed. Hence, release
these references when the context is destroyed.
This leak was triggered by virglrenderer:
https://gitlab.freedesktop.org/virgl/virglrenderer/issues/86
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
radeonsi: release tokens after creating the shader program
ureg_get_tokens clears the reference to the tokens, and create_compute_state makes
a copy, hence the tokens must be explicitely released.
Fixes: Direct leak of 256 byte(s) in 1 object(s) allocated from:
#0 0x7ff729cf3c60 in realloc (/usr/lib64/gcc/x86_64-pc-linux-gnu/7.3.0/libasan.so+0xdbc60)
#1 0x7ff721b1240c in tokens_expand ../../samba/mesa/src/gallium/auxiliary/tgsi/tgsi_ureg.c:234
#2 0x7ff721b1c9c0 in get_tokens ../../samba/mesa/src/gallium/auxiliary/tgsi/tgsi_ureg.c:257
#3 0x7ff721b1c9c0 in copy_instructions ../../samba/mesa/src/gallium/auxiliary/tgsi/tgsi_ureg.c:2040
#4 0x7ff721b1c9c0 in ureg_finalize ../../samba/mesa/src/gallium/auxiliary/tgsi/tgsi_ureg.c:2090
#5 0x7ff721b1e919 in ureg_get_tokens ../../samba/mesa/src/gallium/auxiliary/tgsi/tgsi_ureg.c:2167
#6 0x7ff721f8b35a in si_create_dma_compute_shader ../../samba/mesa/src/gallium/drivers/radeonsi/si_shaderlib_tgsi.c:219
#7 0x7ff722043ed9 in si_compute_do_clear_or_copy ../../samba/mesa/src/gallium/drivers/radeonsi/si_compute_blit.c:156
#8 0x7ff7220448d3 in si_clear_buffer ../../samba/mesa/src/gallium/drivers/radeonsi/si_compute_blit.c:247
#9 0x7ff7220350e8 in vi_dcc_clear_level ../../samba/mesa/src/gallium/drivers/radeonsi/si_clear.c:274
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
v2: Rewrite the condition to more clearly match the comment. (Jordan)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It is always false on Gen8+. Also, move the variable definition near
its use.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
All things being equal is better to keep the original order. Since
the new block is empty, push the phis in order to tail.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Schürmann <daniel.schuermann@campus.tu-berlin.de>
This patch implements the free Midgard shader toolchain: the assembler,
the disassembler, and the NIR-based compiler. The assembler is a
standalone inaccessible Python script for reference purposes. The
disassembler and the compiler are implemented in C, accessible via the
standalone `midgard_compiler` binary. Later patches will use these
interfaces from the driver for online compilation.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
This patch adds an initial stub for the Gallium driver, containing
simple screen functions and the majority of the driver headers but no
actual functionality. It further adds the winsys glue for linking in
this stub driver via kmsro on Rockchip/Amlogic boards.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
st/mesa: Set pipe_image_view::shader_access in PBO readpixels.
Commit 8b626a22b2 introduced a new
pipe_image_view::shader_access field, indicating the access mode
specified in the shader. st/mesa's built-in PBO download shader
creates a write-only image buffer, so we should flag it as such.
Nobody uses this field yet (Iris will), so we don't need to backport
this fix to stable branches.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
anv: Fix VK_EXT_transform_feedback working with varyings packed in PSIZ
Transform feedback did not set correct SO_DECL.ComponentMask for
varyings packed in VARYING_SLOT_PSIZ:
gl_Layer - VARYING_SLOT_LAYER in VARYING_SLOT_PSIZ.y
gl_ViewportIndex - VARYING_SLOT_VIEWPORT in VARYING_SLOT_PSIZ.z
gl_PointSize - VARYING_SLOT_PSIZ in VARYING_SLOT_PSIZ.w
Fixes: 36ee2fd61c "anv: Implement the basic form of VK_EXT_transform_feedback"
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
radv: Handle VK_ATTACHMENT_UNUSED in CmdClearAttachment
From the Vulkan 1.0.98 spec for vkCmdClearAttachments:
"If any attachment to be cleared in the current subpass is VK_ATTACHMENT_UNUSED,
then the clear has no effect on that attachment."
"If the aspectMask member of any element of pAttachments contains
VK_IMAGE_ASPECT_COLOR_BIT, then the colorAttachment member of that
element must either refer to a color attachment which is VK_ATTACHMENT_UNUSED,
or must be a valid color attachment."
"If the aspectMask member of any element of pAttachments contains
VK_IMAGE_ASPECT_DEPTH_BIT, then the current subpass' depth/stencil attachment
must either be VK_ATTACHMENT_UNUSED, or must have a depth component"
"If the aspectMask member of any element of pAttachments contains
VK_IMAGE_ASPECT_STENCIL_BIT, then the current subpass' depth/stencil attachment
must either be VK_ATTACHMENT_UNUSED, or must have a stencil component"
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
anv: Handle VK_ATTACHMENT_UNUSED in colorAttachment
From the Vulkan 1.0.98 spec for vkCmdClearAttachments:
"If the aspectMask member of any element of pAttachments contains
VK_IMAGE_ASPECT_COLOR_BIT, then the colorAttachment member of that
element must either refer to a color attachment which is VK_ATTACHMENT_UNUSED,
or must be a valid color attachment."
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
radv: drop useless checks when resolving subpass color attachments
The Vulkan spec says:
"If pResolveAttachments is not NULL, for each resolve attachment
that does not have the value VK_ATTACHMENT_UNUSED, the
corresponding color attachment must not have the value
VK_ATTACHMENT_UNUSED."
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radv: execute external subpass barriers after ending subpasses
Outgoing dependencies (ie. external) should happen after the subpass.
This doesn't change anything for subpass resolves as we already
make sure that attachments are shader readable.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radv: accumulate all ingoing external dependencies to the first subpass
In case two or more subpasses declare ingoing external dependencies.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The different masks should be accumulated. For example if two
subpasses declare an outgoing dependency (ie. dst ==
VK_SUBPASS_EXTERNAL).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To share common code that handles subpass dependencies.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radv: move some render pass things to radv_render_pass_compile()
radv_render_pass_compile() is common to vkCreateRenderPass()
and vkCreateRenderPass2().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radv: handle final layouts at end of every subpass and render pass
That shouldn't change anything as we check if the last
subpass id is the final subpass.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radv: store the list of attachments for every subpass
This reworks how the depth stencil attachment is used for
simplicity. This also introduces radv_render_pass_compile()
helper that will be used for further optimizations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radv: move subpass image transitions to radv_cmd_buffer_begin_subpass()
Instead of doing them in radv_cmd_buffer_set_subpass().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Kenneth Graunke