gallivm: Add code for rgb9e5 shared exponent format to float conversion
And use this (and the code for r11g11b10 packed float to float conversion)
in the soa texturing code (the generated code looks quite good).
Should be an order of magnitude faster probably than using the fallback
(not measured).
Tested with piglit texwrap GL_EXT_packed_float and
GL_EXT_texture_shared_exponent respectively (didn't find much else using
it).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
gallium,st/mesa: don't use blit-based transfers with software rasterizers
The blit-based paths for TexImage, GetTexImage, and ReadPixels aren't very
fast with software rasterizer. Now Gallium drivers have the ability to turn
them off.
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
Initial version contributed by: Martin Andersson <g02maran@gmail.com>
This is only used if the memcpy path cannot be used and if no transfer ops
are needed. It's pretty similar to our TexImage and GetTexImage
implementations.
The motivation behind this is to be able to use ReadPixels every frame and
still have at least 20 fps (or 60 fps with a powerful GPU and CPU)
instead of 0.5 fps.
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
mesa: add common format-independent memcpy-based ReadPixels path
I'll need the _mesa_readpixels_needs_slow_path function for the blit-based
version, but it's also useful to have this memcpy-based path in one place
and not scattered across several functions.
v2: add "const" to function parameters
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
mesa: add a common function returning transfer ops for ReadPixels
I'll need both new functions for later. For now, it consolidates the code
for determining what the transfer ops should be and makes it a little bit
smarter.
v2: added "const"
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
llvmpipe: add EXT_packed_float render target format support
New conversion code to handle conversion from/to r11g11b10 AoS to/from
SoA floats, and also add code for conversion from rgb9e5 AoS to float SoA
(which works pretty much the same as r11g11b10 except for the packing).
(This code should also be used for texture sampling instead of
relying on u_format conversion but it's not yet, so rgb9e5 is unused.)
Unfortunately a crazy amount of hacks is necessary to get the conversion
code running in llvmpipe's generate_unswizzled_blend, which isn't well
suited for formats where the storage representation has nothing to do
with what's needed for blending (moreover, the conversion will convert
from packed AoS values, which is the storage format, to float SoA values,
because this is much more natural for the conversion, and likewise from
SoA values to packed AoS values - but the "blend" (which includes
trivial things like partial mask) works on AoS values, so incoming fs
values will go SoA->AoS, values from destination will go packed
AoS->SoA->AoS, then do blend, then AoS->SoA->packed AoS which probably
isn't the most efficient way though the shuffles are probably bearable).
Passes piglit fbo-blending-formats (with GL_EXT_packed_float parameter),
still need to verify Inf/NaNs (where most of the complexity in the
conversion comes from actually).
v2: drop the (very bogus) rgb9e5 part, and do component extraction
in the helper code for r11g11b10 to float conversion, making the code
slightly more compact (suggested by Jose), now that there are no other
callers left this works quite well. (Could do the same for the
opposite way but it's less than ideal there, final part of packing
needs to be done in caller anyway and there'd be another conditional.)
v3: minor style and comment fixes. Also fix a potential issue with
negative zero being potentially returned by max(src, zero) as we
don't have well-defined min/max behavior (fortunately no additonal cost).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This helps minimize confusion / effort when moving between branches or
helping others.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
i965: Add a driconf option to disable flush throttling.
Normally when submitting the first batch buffer after a flush, we
check whether the GPU has completed processing of the first batch
buffer of the previous frame. If it hasn't, we wait for it to finish
before submitting any more batches. This prevents GPU-heavy and
CPU-light applications from racing too far ahead of the current frame,
but at the expense of possibly lower frame rates. Sometimes when
benchmarking we want to disable this mechanism.
This patch adds the driconf option "disable_throttling" to disable the
throttling mechanism.
Reviewed-by: Eric Anholt <eric@anholt.net>
mesa: Implement TEXTURE_IMMUTABLE_LEVELS for ES 3.0.
NOTE: This is a candidate for the 9.1 branch.
Fixes piglit's texture-immutable-levels test.
Reported-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
meta: fix incorrect slice, r coordinate computation
The arithmetic to convert a 3D texture slice to an R coordinate was
incorrect. Found when MSVC warned of a divide by zero.
Note that we don't actually ever hit this path. We don't decompress
slices of 3D textures and we don't support 3D mipmap generation yet.
radeonsi: Emit pixel shader state even when only the vertex shader changed
Fixes random failures with piglit glsl-max-varyings.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Christian König <christian.koenig@amd.com>
android: Define PACKAGE_VERSION/BUGREPORT in CFLAGS
This fixes the Android build. Commit 439c3d4 broke it.
CC: Adrian M Negreanu <adrian.m.negreanu@intel.com>
CC: Matt Turner <mattst@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This makes basic built-in functions work in GLSL 1.50. It supports
everything except the new Geometry Shader functions.
The new 150.glsl file is 140.glsl plus ARB_texture_multisample.glsl;
150.frag is identical to 140.frag except for the #version bump.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
glsl: Add sampler2DMS/sampler2DMSArray types to GLSL 1.50.
GLSL 1.50 includes support for the new sampler types introduced by
the ARB_texture_multisample extension.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
The version bumps are necessary in order to compile built-ins for 1.50.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
i965: Don't use texture swizzling to force alpha to 1.0 if unnecessary.
Commit 33599433c7 began setting the texture swizzle mode to XYZ1 for
RED, RG, and RGB textures in order to force alpha to 1.0 in case we
actually stored the texture as RGBA.
This had a unforseen performance implication: the shader precompile
assumes that the texture swizzle mode will be XYZW for non-shadow
sampler types. By setting it to XYZ1, this means every shader used with
a RED, RG, or RGB texture has to be recompiled. This is a very common
case.
Unfortunately, there's no way to improve the precompile, since RGBA
textures still need XYZW, and there's no way to know by looking at
the shader source what texture formats might be used.
However, we only need to smash alpha to 1.0 if the texture's memory
format actually has alpha bits. If not, the sampler already returns 1.0
for us without any special swizzling. XRGB8888, for example, is a very
common case where this occurs.
This partially fixes a performance regression since commit 33599433c7.
More work is required to fully fix it in all cases. This at least helps
Warsow.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
i965: Don't print a fatal-looking message if intelCreateContext fails.
With the old context creation mechanism, an application asked the GL to
give it a context. Failing to produce a context was a fatal error.
Now, with GLX_ARB_create_context, the application can request a specific
version. If it's higher than the maximum version we support, context
creation will fail. But this is a normal error that applications
recover from.
In particular, the new glxinfo tries to create OpenGL 4.3, 4.2, 4.1,
4.0, 3.3, and 3.2 contexts before finally succeeding at creating a 3.1
context. This led to it printing the following message 6 times:
"brwCreateContext: failed to init intel context"
There's no need to alarm users (and developers) with such a message.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
i965/gen7: Align all depth miplevels to 8 in the X direction.
On an INTEL_DEBUG=perf piglit run on IVB, reduces the instances of "HW
workaround: blit" (the printouts from the misaligned-depth workaround
blits) from 725 to 675.
It doesn't totally eliminate the workaround blit, because we still have
problems with Y offsets that we can't fix (since texturing can only align
miplevels up to 2 or 4, not 8).
No regressions on piglit/es3conform on IVB.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes it possible to identify gl_TexCoord and gl_PointCoord
for drivers where sprite coordinate replacement is restricted.
The new PIPE_CAP_TGSI_TEXCOORD decides whether these varyings
should be hidden behind the GENERIC semantic or not.
With this patch only nvc0 and nv30 will request that they be used.
v2: introduce a CAP so other drivers don't have to bother with
the new semantic
v3: adapt to introduction gl_varying_slot enum
gallium-egl: Fix compile errors introduced in de315f76a
The commit changed API in a helper library shared by both egl_dri2 and
the gallium egl state tracker, but only egl_dri2 was updated to use the
new interface.
Tested-by: Giulio Camuffo <giuliocamuffo@gmail.com>
i965/fs: Avoid unnecessary recompiles due to POS bit of proj_attrib_mask.
Previous to this patch, when using fixed function fragment shading,
bit VARYING_BIT_POS of brw_wm_prog_key::proj_attrib_mask was being set
differently during precompiles and normal usage. During precompiles
it was being set only if the fragment shader reads from window
position (which it never does), so it was always being set to 0.
During normal usage it was being set if the vertex shader writes to
all 4 components of gl_Position (which it usually does), so it was
usually being set to 1. As a result, we were almost always doing an
extra recompile for the fixed function fragment shader.
The recompile was totally unnecessary, though, because
brw_wm_prog_key::proj_attrib_mask is only consulted for
fs_visitor::emit_general_interpolation(), which isn't used for
VARYING_SLOT_POS.
This patch avoids the unnecessary recompile by always setting bit
VARYING_BIT_POS of brw_wm_prog_key::proj_attrib_mask to 1.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
ff_fragment_shader: Don't do unnecessary (and dangerous) uniform setup.
Previously, right after calling _mesa_glsl_link_shader(), the fixed
function fragment shader code made several calls with the ostensible
purpose of setting up uniforms for the fragment shader it just
created.
These calls are unnecessary, since _mesa_glsl_link_shader() calls
driver->LinkShader(), which takes care of calling these functions (or
their equivalent). Also, they are dangerous to call after
_mesa_glsl_link_shader() has returned, because on back-ends such as
i965 which do precompilation, _mesa_glsl_link_shader() may have
already cached pointers to the existing uniform structures; attempting
to set up the uniforms again invalidates those cached pointers.
It was only by sheer coincidence that this wasn't manifesting itself
as a bug. It turns out that i965's precompile mechanism was always
setting bit 0 of brw_wm_prog_key::proj_attrib_mask to 0 for fixed
function fragment shaders, but during normal usage this bit usually
gets set to 1. As a result, the precompiled shader (with its invalid
uniform pointers) was not being used.
I'm about to introduce some changes that cause bit 0 of
proj_attrib_mask to be set consistently between precompilation and
normal usage, so to avoid regressions I need to get rid of the
dangerous duplicate uniform setup code first.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
i965: Avoid unnecessary copy when depthstencil workaround invoked by clear.
Since apps typically begin rendering with a call to glClear(), it is
likely that when brw_workaround_depthstencil_alignment() moves a
miplevel to a temporary buffer, it can avoid doing a blit, since the
contents of the miplevel are about to be erased.
This patch adds the necessary plumbing to determine when
brw_workaround_depthstencil_alignment() is being called as a
consequence of glClear(), and avoids the unnecessary blit when it is
safe to do so.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Eliminate unnecessary call to _mesa_is_depthstencil_format(). Fix
handling of depth buffer in depth/stencil format.
v3: Use correct bitfields for clear_mask. Fix handling of depth
buffer in depth/stencil format when hardware uses separate stencil.
When invalidating, make sure we still reassociate the image to the new
miptree.
Reviewed-by: Eric Anholt <eric@anholt.net>
r600g: don't emit SQ_DYN_GPR_RESOURCE_LIMIT_1 on cayman
Doesn't exist on the asic and will cause a CS rejection
if VM is disabled.
Note: this is a candidate for the 9.1 branch.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use vmw_printf() just for extra debugging info (off by default).
Use vmw_error() for real errors/failures/etc that we definitely
want to report.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
radeon/llvm: Do not link against libgallium when building statically.
NOTE: This is a candidate for the 9.1 branch.
Tested-by: Vincent Lejeune <vljn@ovi.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Checks that no functions are exported that are not part of the ABI.
Note that currently we are exporting functions that are aliased to
functions that are part of the ABI. They shouldn't be exported, but the
XML descriptions don't adequately describe this case.
Checks that no functions are exported that are not part of the ABI.
Note that currently we are exporting functions that are aliased to
functions that are part of the ABI. They shouldn't be exported, but the
XML descriptions don't adequately describe this case.
Roland Scheidegger