A couple of typos found by inspecting field.end - field.start, revealed
a few wide integers declared as bool and some that ended before they
started.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
swr/rast: Fix include for createInstructionCombiningPass with llvm-7.0.
Fix build error after llvm-7.0.0svn r330669 ("InstCombine: Fix layering
by not including Scalar.h in InstCombine").
CXX rasterizer/jitter/libmesaswr_la-blend_jit.lo
rasterizer/jitter/blend_jit.cpp:816:20: error: use of undeclared identifier 'createInstructionCombiningPass'; did you mean 'createInstructionSimplifierPass'?
passes.add(createInstructionCombiningPass());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
createInstructionSimplifierPass
Suggested-by: George Kyriazis <george.kyriazis@intel.com>
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-By: George Kyriazis <george.kyriazis@intel.com>
clover: Add explicit virtual destructor to argument class
It is needed to destroy the v vector in scalar_argument
Fixes memory leaks on parameter set/bind.
v2: Drop redundant sclara_argument destructor
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This rollbacks the revert of this patch introduced with
commit 7cf284f18e.
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
i965/compiler: handle conversion to smaller type in the lowering pass for that
This rollbacks the revert of this same patch introduced in
commit 7b9c15628a.
And also squahes the following patch to prevent a piglit regression caused
by this change:
intel/compiler: Fix lower_conversions for 8-bit types.
Author: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
For 8-bit types the execution type is word. A byte raw MOV has 16-bit
execution type and 8-bit destination and it shouldn't be considered
a conversion case. So there is no need to change alignment and enter
in lower_conversions for these instructions.
Fixes a regresion in the piglit test "glsl-fs-shader-stencil-export"
that is introduced with this patch from the Vulkan shaderInt16 series:
'i965/compiler: handle conversion to smaller type in the lowering
pass for that'. The problem is caused because there is already a case
in the driver that injects Byte instructions like this:
mov(8) g127<1>UB g2<32,8,4>UB
And the aforementioned pass was not accounting for the special
handling of the execution size of Byte instructions. This patch
fixes this.
v2: (Jason Ekstrand)
- Simplify is_byte_raw_mov, include reference to PRM and not
consider B <-> UB conversions as raw movs.
v3: (Matt Turner)
- Indentation style fixes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106393
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
intel/compiler: handle 16-bit to 64-bit conversions in BSW platforms
These are subject to the general restriction that anything that is converted
to 64-bit needs to be aligned to 64-bit. We had this already in place for
32-bit to 64-bit conversions, so this patch generalizes the implementation
to take effect on any conversion to 64-bit from a source smaller than
64-bit.
Fixes assembly validation errors in the following CTS tests in BSW:
dEQP-VK.spirv_assembly.instruction.compute.sconvert.int16_to_int64
dEQP-VK.spirv_assembly.instruction.compute.uconvert.uint16_to_uint64
dEQP-VK.spirv_assembly.instruction.compute.sconvert.int16_to_uint64
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
intel/genxml: recognize 0x, 0o and 0b when setting default value
Remove the need of converting values that are documented in
hexadecimal. This patch would allow writing
<field name="3D Command Sub Opcode" ... default="0x1B"/>
instead of
<field name="3D Command Sub Opcode" ... default="27"/>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
With the previous fixes in place, it appears to just work.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
With the previous fixes in place, it appears to just work.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
ffvertex: Don't try to read output registers in fog calculation
Gallium drivers use _mesa_remove_output_reads() via st_program to lower
output reads away. It seems better to just generate the right thing in
the first place.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
mesa: Add missing support for glFogiv(GL_FOG_DISTANCE_MODE_NV)
Found by inspection, so I made a piglit test too.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
mesa/main/readpix: Correct handling of packed floating point values
Make sure that clamping in the pixel transfer operations is enabled/disabled
for packed floating point values just like it is done for single normal and
half precision floating point values.
This fixes a series of CTS tests with virgl that use r11f_g11f_b10f
buffers as target, and where virglrenderer reads these surfaces back
using the format GL_UNSIGNED_INT_10F_11F_11F_REV.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Clear a set back to the state of having zero entries.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
egl: add EGL_BAD_MATCH error case for surfaceless and android
Just like is done for other backends when suitable config is not
found (added in fd4eba4929).
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
swr/rast: Fix WriteBitcodeToFile usage with llvm-7.0.
Fix build error after llvm-7.0svn r325155 ("Pass a reference to a module
to the bitcode writer.").
CXX rasterizer/jitter/libmesaswr_la-JitManager.lo
rasterizer/jitter/JitManager.cpp:548:30: error: reference to type 'const llvm::Module' could not bind to an lvalue of type 'const llvm::Module *'
llvm::WriteBitcodeToFile(M, bitcodeStream);
^
Suggested-by: George Kyriazis <george.kyriazis@intel.com>
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-By: George Kyriazis <george.kyriazis@intel.com>
egl/x11: Send invalidate to driver on copy_region path in swap_buffer
Similar to swap_available path send invalidate to the driver because
egl/X11 is not watching for for server's invalidate events. The
dri2_copy_region path is trigerred when server supports DRI2 version
minor 1.
Tested with piglit egl tests for regression.
V2: Move invalidate from dri2_copy_region to swap_buffer common.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
egl: check if colorspace/surface type is supported
According to EGL 1.4 spec, section 3.5.1 ("Creating On-Screen Rendering
Surfaces"), if config does not support the colorspace or alpha format
attributes specified in attrib_list (as defined for
eglCreateWindowSurface), an EGL_BAD_MATCH error is generated.
This fixes dEQP-EGL.functional.wide_color.*_888_colorspace_srgb (still
not merged,
https://android-review.googlesource.com/c/platform/external/deqp/+/667322),
which is crashing when trying to create a windows surface with RGB888
configuration and sRGB colorspace.
v2: Handle the fix in other backends (Tapani)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
nir/lower_64bit_packing: extend the pass to handle packing from / to 16-bit.
With 16-bit support we can now do 32-bit packing, a follow-up patch will
rename the pass to something more generic.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Noitice that we don't need 'split' versions of the 64-bit to / from
16-bit opcodes which we require during pack lowering to implement these
operations. This is because these operations can be expressed as a
collection of 32-bit from / to 16-bit and 64-bit to / from 32-bit
operations, so we don't need new opcodes specifically for them.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
NIR assumes that booleans are always 32-bit, but Intel hardware produces
16-bit booleans for 16-bit comparisons. This means that we need to convert
the 16-bit result to 32-bit.
In the future we want to add an optimization pass to clean this up and
hopefully remove the conversions.
v2 (Jason): use the type of the source for the temporary and use
brw_reg_type_from_bit_size for the conversion to 32-bit.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
intel/compiler: lower some 16-bit integer operations to 32-bit
These are not supported in hardware for 16-bit integers.
We do the lowering pass after the optimization loop to ensure that we
lower ALU operations injected by algebraic optimizations too.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
compiler/nir: add a lowering pass to convert the bit size of ALU operations
Not all bit-sizes may be supported natively in hardware for all operations.
This pass allows drivers to lower such operations to a bit-size that is
actually supported and then converts the result back to the original
bit-size.
Compiler backends control which operations and wich bit-sizes require
the lowering through a callback function.
v2: generalize this pass and make it available in NIR core (Rob, Jason)
v3: remove some temporaries and reduce nesting in instruction loop using
a continue statement (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
intel/compiler: fix brw_imm_w for negative 16-bit integers
16-bit immediates need to replicate the 16-bit immediate value
in both words of the 32-bit value. This needs to be careful
to avoid sign-extension, which the previous implementation was
not handling properly.
For example, with the previous implementation, storing the value
-3 would generate imm.d = 0xfffffffd due to signed integer sign
extension, which is not correct. Instead, we should cast to
uint16_t, which gives us the correct result: imm.ud = 0xfffdfffd.
We only had a couple of cases hitting this path in the driver
until now, one with value -1, which would work since all bits are
one in this case, and another with value -2 in brw_clip_tri(),
which would hit the aforementioned issue (this case only affects
gen4 although we are not aware of whether this was causing an
actual bug somewhere).
v2: Make explicit uint32_t casting for left shift (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "18.0 18.1" <mesa-stable@lists.freedesktop.org>
intel/compiler: fix 16-bit int brw_negate_immediate and brw_abs_immediate
From Intel Skylake PRM, vol 07, "Immediate" section (page 768):
"For a word, unsigned word, or half-float immediate data,
software must replicate the same 16-bit immediate value to both
the lower word and the high word of the 32-bit immediate field
in a GEN instruction."
This fixes the int16/uint16 negate and abs immediates that weren't
taking into account the replication in lower and upper words.
v2: Integer cases are different to Float cases. (Jason Ekstrand)
Included reference to PRM (Jose Maria Casanova)
v3: Make explicit uint32_t casting for left shift (Jason Ekstrand)
Split half float implementation. (Jason Ekstrand)
Fix brw_abs_immediate (Jose Maria Casanova)
Cc: "18.0 18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
i965/compiler: handle conversion to smaller type in the lowering pass for that
The lowering pass was specialized to act on 64-bit to 32-bit conversions only,
but the implementation is valid for other cases.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We need to use 16-bit constants with 16-bit instructions,
otherwise we get the following validation error:
"Destination stride must be equal to the ratio of the sizes of
the execution data type to the destination type"
Because the execution data type is 4B due to the 32-bit integer
constant.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Always enable use of HW logical contexts to preserve GPU state between
batches when the kernel supports such constructs, continuing to enforce
the required support for gen6+.
At runtime, this effectively removes the BRW_NEW_CONTEXT flag (and the
upload of invariant state) from the start of every batch for any kernel
supporting contexts. So long as the older atoms are correctly listening
to the right flag (NEW_CONTEXT rather than NEW_BATCH) this should
eliminate a few redundant state uploads for the older platforms.
No piglits were harmed on ctg and ilk, both with and without logical
contexts.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This behaviour was changed in 1e5b09f42f. The commit message
for that says it is just a “tidy up” so my assumption is that the
behaviour change was a mistake. It’s a little hard to decipher looking
at the diff, but the previous code before that patch was:
if (builtin == SpvBuiltInFragCoord || builtin == SpvBuiltInSamplePosition)
nir_var->data.origin_upper_left = b->origin_upper_left;
if (builtin == SpvBuiltInFragCoord)
nir_var->data.pixel_center_integer = b->pixel_center_integer;
After the patch the code was:
case SpvBuiltInSamplePosition:
nir_var->data.origin_upper_left = b->origin_upper_left;
/* fallthrough */
case SpvBuiltInFragCoord:
nir_var->data.pixel_center_integer = b->pixel_center_integer;
break;
Before the patch origin_upper_left affected both builtins and
pixel_center_integer only affected FragCoord. After the patch
origin_upper_left only affects SamplePosition and pixel_center_integer
affects both variables.
This patch tries to restore the previous behaviour by changing the
code to:
case SpvBuiltInFragCoord:
nir_var->data.pixel_center_integer = b->pixel_center_integer;
/* fallthrough */
case SpvBuiltInSamplePosition:
nir_var->data.origin_upper_left = b->origin_upper_left;
break;
This change will be important for ARB_gl_spirv which is meant to
support OriginLowerLeft.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Fixes: 1e5b09f42f "spirv: Tidy some repeated if checks..."
spirv: convert some operands for bitwise shift and bitwise ops to uint32
SPIR-V allows to define the shift, offset and count operands for
shift and bitfield opcodes with a bit-size different than 32 bits,
but in NIR the opcodes have that limitation. As agreed in the
mailing list, this patch adds a conversion to 32 bits to fix this.
For more info, see:
https://lists.freedesktop.org/archives/mesa-dev/2018-April/193026.html
v2:
- src_bit_size will have zero value for variable bit-size operands (Jason).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
radv: Don't check the incoming apiVersion on CreateInstance.
This fixes
dEQP-VK.api.device_init.create_instance_invalid_api_version
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
radv: Allow vkEnumerateInstanceVersion ProcAddr without instance.
Apparently the somewhere between 1.1.70 and 1.1.73 the loader started
depending on this. The loader then creates a 1.0 instance, which gets
into funny situation because we have a 1.1 device.
No idea how to do line wrapping in Mako though, my random guesses
did not work.
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Chris Wilson