This is a bit of a mega-commit, but unfortunately there's no great way
to break this up since a lot of different pieces have to match up. Here
we do the following:
- change surface layout to match swr's Load/StoreTile expectations
- fix sampler settings to respect all sampler view parameters
- fix stencil sampling to read from secondary resource
- respect pipe surface format, level, and layer settings
- fix resource map/unmap based on the new layout logic
- fix resource map/unmap to copy proper parts of stencil values in and
out of the matching depth texture
These fix a massive quantity of piglits, including all the
tex-miplevel-selection ones.
Note that the swr native miptree layout isn't extremely space-efficient,
and we end up using it for all textures, not just the renderable ones. A
back-of-the-envelope calculation suggests about 10%-25% increased memory
usage for miptrees, depending on the number of LODs. Single-LOD textures
should be unaffected.
There are a handful of regressions as a result of this change:
- Some textureGrad tests, these failures match llvmpipe. (There are
debug settings allowing improved gallivm sampling accurancy.)
- Some layered clearing tests as swr doesn't currently support that. It
was getting lucky before because enough other things were broken.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
util: fix missing swizzle components in the SINT <-> UINT conversion string
Fixes tgsi error introduced in commit 3817a7a. The error complains missing
swizzle component in the conversion string "UMIN TEMP[0], TEMP[0], IMM[0].x".
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
vc4: Don't conditionalize the src1 mov of qir_SEL().
My thought in having both arguments conditionally moved was that it should
theoretically save some power by not doing work in those channels.
However, it ends up costing us instructions because we can't
register-coalesce the first of the MOVs, and it also introduces extra
scheduling dependencies. The instruction cost would swamp whatever power
benefit I was hoping for.
shader-db results:
total instructions in shared programs: 100548 -> 99741 (-0.80%)
instructions in affected programs: 42450 -> 41643 (-1.90%)
With obvious outliers removed (I had an X11 emacs running over the network
in the "after" case), 3DMMES Taiji showed 1.07231% +/- 0.488241% fps
improvement (n=18, 30).
I screwed this up in fdad4d2402 which was
supposed to be making this code more maintainable. What's amazing is
multithreaded FS showed the wins it did despite this bug.
shader-db results:
total instructions in shared programs: 103535 -> 100548 (-2.89%)
instructions in affected programs: 83794 -> 80807 (-3.56%)
vc4: Disable MSAA rasterization when the job binning is single-sampled.
Gallium core just changed to start setting MSAA enabled in the rasterizer
state even with samples==1 buffers. This caused disagreements in our
driver between binning and rasterization state, which the simulator threw
assertion failures about. Keep the single-sampled samples==1 behavior for
now.
vc4: Make sure we don't overflow texture input/output FIFOs when threaded.
I dropped the first hunk of this change last minute when I decided it
wasn't actually needed, and apparently failed to piglit it in simulation.
The simulator threw an an assertion in gl-1.0-drawpixels-color-index,
which queued up 5 coordinates (3 before a switch, two after) before
loading the result.
radv: move pipeline barrier image transitions after src flushing
This seems like it would conform better with the spec.
noticed while digging into fast clears.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It turns out that the flushing required around resolves is a bit more
extensive than I first thought. You actually need render cache flush
and a CS stall both before *and* after the resolve.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
anv/cmd_buffer: Apply remaining flushes in EndCommandBuffer
Otherwise, some pipe flushes may just never happen. This is unlikely to
cause problems depending on how the kernel schedules batches, but we
shouldn't count on it.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
anv/blorp: Use regular blorp clears for subpass clears
At vkCmdNextSubpass time, we have the actual framebuffer so we can use
regular blorp_clear for subpass clears. For fast clears, there is no
attachment version, so this will make fast clears a bit easier.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
anv: Set up binding tables and surface states for input attachments
This commit adds the last remaining bits to support input attachments in
the Intel Vulkan driver. For color and depth attachments, we allocate an
input attachment surface state during vkCmdBeginRenderPass like we do for
the render target surface states. This is so that we can incorporate the
clear color and aux information as used in rendering. For stencil, we just
treat it like a regular texture because we don't there is no aux. Also,
only having to worry about at most one input attachment surface for each
attachment makes some of the vkCmdBeginRenderPass code simpler.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
anv: Use pass attachment information to insert flushes
Input and resolve attachments can cause an implicit dependency in the
pipeline. It's our job to insert the needed flushes. Fortunately, we can
easily reuse the usage tracking that we use for CCS resolves.
This fixes 159 Vulkan CTS tests on Haswell because we're now flushing in
between drawing and MSAA resolves. I have no idea how they were passing
before on newer hardware.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
anv/cmd_buffer: Fix pipeline barriers for input attachments
We were using VK_IMAGE_ACCESS_COLOR_ATTACHMENT_READ_BIT to detect an input
attachment read. We should use VK_IMAGE_ACCESS_INPUT_ATTACHMENT_READ_BIT
instead.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
There are actually 6 of them according to the GL_KHR_vulkan_glsl spec.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
anv/cmd_buffer: Add an assert on emit_binding_table failure
The != VK_SUCCESS case is really only capable of handling the one error.
This assert makes things a bit safer if something else goes wrong.
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
gbm: request correct version of the DRI2_FENCE extension
There is no version 2 of the DRI2_FENCE extension. So only a request
for version 1 has a chance to succeed.
Fixes: 74b1969d71 (gbm: wire up fence extension)
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
anv/cmd_buffer: Re-emit MEDIA_CURBE_LOAD when CS push constants are dirty
This can happen even if the binding table isn't changed. For instance, you
could have dynamic offsets with your descriptor set. This fixes the new
stress.lots-of-surface-state.cs.dynamic cricible test.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
anv/cmd_buffer: Handle running out of binding tables in compute shaders
If we try to allocate a binding table and fail, we have to get a new
binding table block, re-emit STATE_BASE_ADDRESS, and then try again. We
already handle this correctly for 3D and blorp but it never got handled for
CS. This fixes the new stress.lots-of-surface-state.cs.static crucible test.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
The precision of our trig instructions appears to have been fixed on Kaby
Lake. Neither Ben nor I can find any documentation for this. However, the
dEQP precision tests now pass with INTEL_PRECISE_TRIG=0 where they fail on
Sky Lake.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
intel/common: Add an is_kabylake field to gen_device_info
Most of the 3-D engine Kaby Lake is identical to Sky Lake. However, there
are a few small differences that we need to be able to detect.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
anv: Fix unintentional integer overflow in anv_CreateDmaBufImageINTEL
Since both pCreateInfo->strideInBytes and pCreateInfo->extent.height
are of uint32_t type 32-bit arithmetic will be used.
Fix unintentional integer overflow by casting to uint64_t before
multifying.
CID 1394321
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
[Emil Velikov: cast only of the arguments]
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
util/disk_cache: close a previously opened handle in disk_cache_put (v2)
We're missing the close() to the matching open().
CID 1373407
v2: Fixes from Emil Velikov's review
Update the teardown in reverse order of the setup/init.
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> (v1)
Mention the script - why/how to use alongside a useful trick to make it
work interactively (thanks Rob!).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Elie Tournier <tournier.elie@gmail.com>
v2: [Emil Velikov]
- Add the shorthand git send-email -vX
- Move to submittingpatches.html
- Add to the TOC.
v3: [Emil Velikov]
- Use @~8 instead of HEAD~8 (Nicolai)
Cc: Timothy Arceri <t_arceri@yahoo.com.au>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
egl/x11: store xcb_screen_t *screen instead of int screen
Just fetch and store it once, rather than doing the
xcb_setup_roots_iterator + get_xcb_screen dance five times.
v2: Call xcb_disconnect() on error (Eric)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Identical throughout dri2, dri3 and drisw. Next patch will add more
common code, so rather than duplicating it factor out the function.
Note: this also sets eglError on failure. Something that's quite
inconsistent throughout the codebase.
v2: Call xcb_disconnect() on error (Eric)
Note: use xcb_disconnect() even in the xcb_connection_has_error() case
as per the manual:
... memory will not be freed until xcb_disconnect...
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
i965: Use NIR-based clip/cull lowering for OpenGL as well.
The old approach works fine, and this approach isn't necessarily better.
But it at least has the advantage that Vulkan and GL use the same
approach. I originally wrote it to gain additional testing for the
new paths.
shader-db statistics show 0 instruction count changes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Everything is now in place, and we appear to pass the tests on Gen7+.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Ilia Mirkin