This is needed for LDVPM on V3D 4.x, but will also be needed for keeping
values out of the accumulators across THRSW.

Now, instead of a magic write register for VPM stores we have an
instruction to do them (which means no packing of other ALU ops into it),
with the ability to reorder the VPM stores due to the offset being baked
into the instruction.

VPM loads also gain the ability to be reordered by packing the row into
the A argument.  They also no longer write to the r3 accumulator, and
instead must be stored to a physical register.

I had all the packing code in this file at one point, but these defines
now live in qpu_pack.c.

This required moving the register accesses to a separate v3dx file, since
the register definitions for each V3D version collide.  It seems that
initializing the v3d_hw from a file dictating 3.3
(v3d_simulator_wrapper.cpp) is safe, though.

Signals are more complicated than that, and tables ended up being better.

The WRTMUC replaces the implicit uniform loads in the first two texture
instructions.  LDVPM disappears in favor of an ALU op.  LDVARY, LDTMU,
LDTLB, and LDUNIF*RF now write to arbitrary registers, which required
passing the devinfo through to a few more functions.

The TLB load/store path is rebuilt in this version.  There is no longer a
single-byte resolved store or the 3-byte extended store.  Instead, you get
to always use general loads/stores (which, honestly, was tempting even in
previous versions).

I accidentally emitted this into the RCL instead of the per-tile generic
list, so we wouldn't get tiles after the first cleared.

This is going to get more complicated with V3D 4.1 support, which redoes
all the TLB packets.

To conditionally compile cl_emit() macros per V3D version, we need it to
expand to whatever V3D we're building for.  This required emitting #define
V3D_VERSION 33 in all our currently 3.3-only code.

This will be used by vc5 for prefixing functions and including the pack
header in v3d-version-dependent code, following the model of anv.

We try to emit a #error and continue so that you can debug the missing
type at C compile time, but were missing a couple of definitions in that
path (sigh, python).

For clarification purposes.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

To avoid compilation warnings and because this helper
shouldn't update anything.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

Upon reception of an event that lowered the number of active back buffers,
the code would immediately try to free all back buffers with an id equal to or
higher than the new number of active back buffers.

However, that could lead to an active or to-be-active back buffer being freed,
since the old number of back buffers was used when obtaining an idle back
buffer for use.

This lead to crashes when lowering the number of active back buffers by
transitioning from page-flipping to non-page-flipping presents.

Fix this by computing the number of active back buffers only when trying to
obtain a new back buffer.

Fixes: 15e208c4cc ("loader/dri3: Don't accidently free buffer holding new back content")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104214
Cc: "17.3" <mesa-stable@lists.freedesktop.org>
Tested-by: Andriy.Khulap <andriy.khulap@globallogic.com>
Tested-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

From Vulkan spec:

"descriptorCount is the number of descriptors contained in the binding,
accessed in a shader as an array. If descriptorCount is zero this
binding entry is reserved and the resource must not be accessed from
any stage via this binding within any pipeline using the set layout."

Fixes:

dEQP-VK.binding_model.descriptor_update.empty_descriptor.uniform_buffer

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org

ARB_ubo requires 12 UBOs (per stage) at least, but this limit has been
raised by GL 4.3 to 14, so don't advertize GL 4.3 without it (only checking
the vertex stage since all drivers probably have the same limit anyway for
other stages). (piglit has minmax tests for that kind of thing, but they go
only up to 3.3, so this won't really be noticed.)
I think this currently should not affect any driver - r600 until very
recently only supported 12 but now advertizes 14 too.

Reviewed-by: Brian Paul <brianp@vmware.com>

We've seen some problems internally due to macro redefinition.
Fix this by adding HAVE_FUNC_ATTRIBUTE_NORETURN to c99_compat.h,
and defining it for msvc.
And avoid redefinition just in case.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

If the number of instances hasn't changed and we've already
emitted it, don't emit it again.

If the vertex shader is the same and the first_instance, vertex_offset
haven't changed don't emit them again.

This increases the fps in GL_vs_VK -t 1 -m -api vk from around 40
to around 60 here, it may not impact anything else.

Dieter also reported smoketest going from 1060->1200 fps.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Running dota2 since the below commit crashes with an llvm assert.

Trim the vector like the other user. This possible could also be
avoided by not padding inside the load vec3->vec4.

Fixes: 41c36c4549 (amd/common: use ac_build_buffer_load() for emitting UBO loads)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>

Otherwise this could be undefined in the egl directory.

Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>

This simplifies the build by removing the need to link targets against
libsensors.

Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>

This creates two new internal dependencies, idep_nir_headers and
idep_nir. The former encapsulates the generation of nir_opcodes.h and
nir_builder_opcodes.h and adding src/compiler/nir as an include path.
This ensures that any target that needs nir headers will have the
includes and that the generated headers will be generated before the
target is build. The second, idep_nir, includes the first and
additionally links to libnir.

This is intended to make it easier to avoid race conditions in the build
when using nir, since the number of consumers for libnir and it's
headers are quite high.

Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>

For things like:
loop
    x = func()
    list += x
end

just do:
loop
    list += func()
end

Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>

Don't use intermediate variables, use consistent whitespace.

Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>

These were added after adderlib was mesonified, but it still good to use
them instead of open coding them.

Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>

Currently the meosn build has a mix of two styles:
arg : [foo, ...
       bar],

and
arg : [
  foo, ...,
  bar,
]

For consistency let's pick one. I've picked the later style, which I
think is more readable, and is more common in the mesa code base.

v2: - fix commit message

Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>

We already had to switch all of the W types to UW to prevent issues
with vector immediates on gen10.  We may as well use unsigned types
everywhere.

Reviewed-by: Matt Turner <mattst88@gmail.com>

Gen 10 has a strange hardware bug involving V immediates with W types.
It appears that a mov(8) g2<1>W 0x76543210V will actually result in g2
getting the value {3, 2, 1, 0, 3, 2, 1, 0}.  In particular, the bottom
four nibbles are repeated instead of the top four being taken.  (A mov
of 0x00003210V yields the same result.)  This bug does not appear in any
hardware documentation as far as we can tell and the simulator does not
implement the bug either.

Commit 6132992cdb was mostly a no-op
except that it changed the type of the subgroup invocation from UW to W
and caused us to tickle this bug with basically every compute shader
that uses any sort of invocation ID (which is most of them).  This is
also potentially an issue for geometry shader input pulls and SampleID
setup.  The easy solution is just to change the few places where we use
a vector integer immediate with a W type to use a UW type.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Fixes: 6132992cdb

Without this we end up with the llvm error message:

"Both operands to a binary operator are not of the same type!"

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

Without this we end up with the llvm error message:

"Both operands to a binary operator are not of the same type!"

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

Without this we end up with the llvm error message:

"Both operands to a binary operator are not of the same type!"

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

Per spec:

"Additionally, exporting a fence payload to a handle with copy transference has the same side effects
on the source fence’s payload as executing a fence reset operation. If the fence was using a
temporarily imported payload, the fence’s prior permanent payload will be restored."

And similar for semaphores:

"Additionally, exporting a semaphore payload to a handle with copy transference has the same side
effects on the source semaphore’s payload as executing a semaphore wait operation. If the
semaphore was using a temporarily imported payload, the semaphore’s prior permanent payload
will be restored."

Fixes: 42bc25a79c "radv: Advertise sync fd import and export."
Reviewed-by: Dave Airlie <airlied@redhat.com>

More Coffee Lake PCI IDs have been added to the spec.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This reverts commit 2d04572038.

Acked-by: Scott D Phillips <scott.d.phillips@intel.com>

Some cases weren't handled, such as stride 4 which is needed for 64-bit
operations. Presumably fixes the assertion failure mentioned in commit
2d04572038 (Revert "i965/fs: Use align1 mode on ternary instructions
on Gen10+") but who can really say since the commit neglected to list
any of them!

Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>

After executing a secondary command buffer, we need to update certain
state on the primary command buffer to reflect changes by the secondary.
Otherwise subsequent commands may not have the correct state set.

This fixes various issues (rendering errors, GPU hangs) seen after
executing secondary command buffers in some cases.

v2 (Jason Ekstrand):
 - Reset to invalid values instead of pulling from the secondary
 - Change the comment to be more descriptive

Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org

No need for a goto.

Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

anv_extensions usage from anv_icd was bringing the unwanted dependency
of mako templates for the latter. We don't want that since it will
force the dependency even for distributable tarballs which was not
needed until now.

Jason suggested this approach.

v2: Patch simplification (Jason).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104551
Fixes: 0ab04ba979 ("anv: Use python to generate ICD json files")
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>