st/mesa: add GL_ARB_shader_draw_parameters support
Hooks up the new system values, passes the drawid in.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This will allow the state tracker to inform the driver where in a
broken-up multidraw we currently are. This can then be passed into the
vertex shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This allows the state tracker to know that the various draw parameters
are available in vertex shaders.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
nv50/ir: attempt to do more constant folding on mad -> add conversion
The add might actually have a 0 as an argument, which would convert it
into a mov. Make sure to detect that. Also avoid the hack of putting the
immediate directly into the instruction, instead use a mov to put it
into place and let the later LoadPropagation pass place it if possible.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
i965/gen8: Always use BRW_REGISTER_TYPE_UW for MUL on GEN8+
The imulExtended tests of the shader bitfield tests of the
OpenGL ES 3.1 CTS, fail on gen8+, when BRW_REGISTER_TYPE_W
is used for SHADER_OPECODE_MULH.
Also, remove unused helper function:
static inline bool type_is_signed(unsigned type)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92595
Signed-off-by: Marta Lofstedt <marta.lofstedt@linux.intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
There used to be more members but they now share other fields
in order to keep memory use low.
Also making the naming more generic will allow us to reuse the
field for explicit byte offsets within blocks for
ARB_enhanced_layouts.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
nir/builder: Add an init function that creates a simple shader for you
A hugely common case when using nir_builder is to have a shader with a
single function called main. This adds a helper that gives you just that.
This commit also makes us use it in the NIR control-flow unit tests as well
as tgsi_to_nir and prog_to_nir.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
mesa/st: Pad out _mesa_sysval_to_semantic for new SYSTEM_VALUE_* enums
GL_ARB_shader_draw_parameters added two new system values. This gets us
back to mapping mesa system values to the right TGSI semantics.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Make sure to make conversion unsigned when we're ANDing the high bits
away. Fixes corruption in dolphin.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
i965: Reemit vertex state between indirect multi draws
If we're doing an indirect draw, prims[i].basevertex is always 0 and the
real base vertex value is in the indirect parameter buffer. We try to
avoid flagging BRW_NEW_VERTICES if prims[i].basevertex doesn't change,
which then breaks down for indirect draws. Thus, if a program uses base
vertex or base instance, and the draw call is indirect, always flag
BRW_NEW_VERTICES. A new piglit test,
spec/ARB_shader_draw_parameters/drawid-indirect-vertexid tests this.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
nir: Teach nir_opt_algebraic about adding and subtracting the same thing
This optimizes a + b - b to just a. Modest shader-db results (BDW):
total instructions in shared programs: 7842452 -> 7841862 (-0.01%)
instructions in affected programs: 61938 -> 61348 (-0.95%)
total loops in shared programs: 2131 -> 2131 (0.00%)
helped: 263
HURT: 0
GAINED: 0
LOST: 0
but the optimization turns
gl_VertexID - gl_BaseVertexARB
into just a reference to SYSTEM_VALUE_VERTEX_ID_ZERO_BASE, which the
i965 hardware supports natively. That means we can avoid using the
internal vertex buffer for gl_BaseVertexARB in this case.
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
i965: Add support for gl_DrawIDARB and enable extension
We have to break open a new vec4 for gl_DrawIDARB. We've used up all
space in the vec4 we use for SGVS and gl_DrawIDARB has to come from its
own separate vertex buffer anyway. This is because we point the vb for
base vertex and base instance into the draw parameter BO for indirect
draw calls, but the draw id is generated by mesa in a different buffer.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
i965: Add support for gl_BaseVertexARB and gl_BaseInstanceARB
We already have gl_BaseVertexARB in the .x component of the SGVS vec4
and plug gl_BaseInstanceARB into the last free component (.y).
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
i965: Assert that SYSTEM_VALUE_VERTEX_ID gets lowered
fs_visitor::emit_vs_system_value() looks like it's trying to handle
SYSTEM_VALUE_VERTEX_ID, but we should never see that value in the
backend.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The drivers will need this for passing in gl_DrawIDARB. For indirect
multidraw calls, we get the prim array and prim[i].draw_id == i and is
redundant. But for non-indirect calls, we get one primitive at a time
and need the draw_id field.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This option allows replacing a single shader by a pre-compiled ELF object
as generated by LLVM's llc, for example. This can be useful for debugging a
deterministically occuring error in shaders (and has in fact helped find
the causes of https://bugs.freedesktop.org/show_bug.cgi?id=93264).
v2: drop the debug flag, use DEBUG_GET_ONCE_OPTION instead
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This changes the count slightly (because of si_generate_gs_copy_shader), but
this is only relevant for the driver-specific num-compilations query. It sets
the stage for the next commit.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
When buffer size is less than 16, zero ends up being programmed as
size, which prevents the hardware from fetching the correct values.
Fix it by combining shift and align so that the value is always
rounded up.
Cc: "11.1 11.0 10.6" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92229
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
docs: Mark ARB_tessellation_shader as done on all i965 platforms.
We now support all Intel GPUs which can do tessellation.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We've resolved all the GPU hangs, and everything seems to be working.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
i965: Don't set interleave or complete on TCS EOT message.
Setting interleave on the TCS EOT message causes Ivybridge hardware to
GPU hang like crazy. Individual tests would pass, but running even a
simple test like nop.shader_test in a loop would hang within 1-3 runs.
Adding sleep delays worked around the problem, somehow.
Interleave doesn't make much sense given that we only have one patch
URB handle, not two. Complete doesn't seem useful either.
There's no reason to actually set those bits. We were just being lazy.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
i965: Relase input URB Handles on Gen7/7.5 when TCS threads finish.
Pre-Broadwell hardware requires us to manually release the ICP Handles
by issuing URB read messages with the "Complete" bit set. We can do
this in pairs to use fewer URB read messages.
Based heavily on work from Chris Forbes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
i965: Port tessellation evaluation shaders to vec4 mode.
This can be used on Broadwell by setting INTEL_SCALAR_TES=0.
More importantly, it will be used for Ivybridge and Haswell.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When Connor originally drafted NIR, he copied the same function+overload
system that GLSL IR had with a few names changed. However, this
double-indirection is not really needed and has only served to confuse
people. Instead, let's just have functions which may not have unique names
and may or may not have an implementation. If someone wants to do overload
resolving, they can hav a hash table based function+overload system in the
overload resolving pass. There's no good reason to keep it in core NIR.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
ir3 bits are
Reviewed-by: Rob Clark <robclark@gmail.com>
gallium/auxiliary: don't build NIR sources with MSVC2008 flags
NIR has never been built with MSVC2008, so we shouldn't add
MSVC2008_COMPAT_CFLAGS to anything that uses it. This allows us to get
rid of the pragma in tgsi_to_nir.c.
Build tested with freedreno.
v2: Use MSVC2013_COMPAT_CLFAGS instead.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
i965/gen8/cs: Gen8 requires 64 byte alignment for push constant data
The BDW PRM Vol2a: Command Reference: Instructions, section MEDIA_CURBE_LOAD,
says that 'CURBE Total Data Length' and 'CURBE Data Start Address' are
64-byte aligned. This is different from previous gens, that were 32-byte
aligned.
v2 (Jordan):
- CURBE Data Start Address is also 64-byte aligned.
- The call to brw_state_batch should also use 64-byte alignment.
- Improve PRM reference.
v3:
* New patch from Jordan. Always align base and size to 64 bytes.
Fixes the following SSBO CTS tests on BDW:
ES31-CTS.shader_storage_buffer_object.basic-atomic-case1-cs
ES31-CTS.shader_storage_buffer_object.basic-operations-case1-cs
ES31-CTS.shader_storage_buffer_object.basic-operations-case2-cs
ES31-CTS.shader_storage_buffer_object.basic-stdLayout_UBO_SSBO-case2-cs
ES31-CTS.shader_storage_buffer_object.advanced-write-fragment-cs
ES31-CTS.shader_storage_buffer_object.advanced-indirectAddressing-case2-cs
ES31-CTS.shader_storage_buffer_object.advanced-matrix-cs
And many other CS CTS tests as reported by Marta Lofstedt.
(Commit message is from Iago, but in v3, code is from Jordan.)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Everything is in place and I'm not aware of any further issues.
Tested with:
- Piglit
- Tessmark
- Unigine Heaven
- Shadow of Mordor
- GRID Autosport
I have patches to backport this to Haswell, Ivybridge, and Baytrail as
well (the first Intel hardware to support tessellation), but there are
still a lot of GPU hangs left to debug. So that will come later.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
i965: Handle mix-and-match TCS/TES with separate shader objects.
GL_ARB_separate_shader_objects allows the application to mix-and-match
TCS and TES programs separately. This means that the interface between
the two stages isn't known until the final SSO pipeline is in place.
This isn't a great match for our hardware: the TCS and TES have to agree
on the Patch URB entry layout. Since we store data as per-patch slots
followed by per-vertex slots, changing the number of per-patch slots can
significantly alter the layout. This can easily happen with SSO.
To handle this, we store the [Patch]OutputsWritten and [Patch]InputsRead
bitfields in the TCS/TES program keys, introducing program recompiles.
brw_upload_programs() decides the layout for both TCS and TES, and
passes it to brw_upload_tcs/tes(), which store it in the key.
When creating the NIR for a shader specialization, we override
nir->info.inputs_read (and friends) to the program key's values.
Since everything uses those, no further compiler changes are needed.
This also replaces the hack in brw_create_nir().
To avoid recompiles, brw_precompile_tes() looks to see if there's a
TCS in the linked shader. If so, it accounts for the TCS outputs,
just as brw_upload_programs() would. This eliminates all recompiles
in the non-SSO case. In the SSO case, there should only be recompiles
when using a TCS and TES that have different input/output interfaces.
Fixes Piglit's mix-and-match-tcs-tes test.
v2: Pull the brw_upload_programs code into a brw_upload_tess_programs()
helper function (requested by Jordan Justen).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
i965: Defer input lowering for tessellation stages until specialization.
With tessellation shaders and SSO, we won't be able to always decide on
VUE map layouts at LinkProgram time. Unfortunately, we have to delay it
until shader specialization time.
However, uniform lowering cannot be deferred - brw_codegen_*_prog()
reads nir->num_uniforms. Fortunately, we don't need to defer it -
uniform, system value, atomic, and sampler lowering can safely stay
where it is. This patch moves those to brw_lower_nir()'s only caller,
renames brw_lower_nir() to brw_nir_lower_io(), and introduces calls
to that.
For non-tessellation stages, I chose to call brw_nir_lower_io() from
brw_create_nir(), so it's still done at the same time. There's no
need to defer it, and doing it at LinkProgram time is nice.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This way, I can safely use brw_tcs_prog_key::program_string_id == 0
to mean "not filled out because no program exists", which avoids the
need for adding an extra boolean to that struct.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Ilia Mirkin