A ton of tests were fixed by this series. A few were incorrectly passing
before (QualityError, for instance) and now are explicitly failing. A
few legitimate regressions but overwhelmingly positive.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes cube map tests due to disagreements between Mesa, dEQP, and the
spec...
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
panfrost: Use the sampler_view target (not the textures)
u_blitter gets "special treatment" and uses this mechanism to cast
cube maps to 2D textures in order to texelFetch them.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
In a vertex shader, a tex op should map to txl, as there *must* be a LOD
given to the hardware (implicitly or explicitly).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Identify the seamless cubemap bit and passthrough the Gallium state
rather than setting unconditionally.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This is similar to the AFBC merge; now all (non-imported) buffers use a
common backing buffer. Reenables checksumming, eliminating a performance
regression.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
I thought I already fixed this. Maybe that was a dream...? Then again, I
might be dreaming now.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
panfrost: Use dedicated u_blitter context for wallpapers
The main ctx->blitter instance should be reserved for blits originated
from Gallium (like mipmap generation). Since wallpapering is
conceptually different -- wallpaper blits can be triggered by Gallium
blits -- the blitter pipes must be separate to avoid potential u_blitter
recursion.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Rather than tracking AFBC memory "specially", just use the same codepath
as linear and tiled. Less things to mess up, I figure. This allows us to
use the standard setup_slices() call with AFBC resources, allowing
mipmapped AFBC resources.
Unfortunately, we do have to disable AFBC (and checksumming) in the
meantime to avoid functional regressions, as we don't know _a priori_ if
we'll need to access a resource from software (which is not yet hooked
up with AFBC) and we don't yet have routines to switch the layout of a
BO at runtime.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
As far as we know, Utgard-style tiling only works for color render
targets, not depth/stencil, so ensure we don't try to tile it (rather
than compress or plain old linear) and drive ourselves into a corner.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Now the autogeneration of mipmaps is working (via u_blitter), we can
finally enable mipmaps!
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Now that all the prerequisites breaking u_blitter are fixed, we can
finally hook up panfrost_blit.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
txf instructions can result from blits, so handle them rather than
crash. Only works for 2D textures (not even 2D array texture) due to a
register allocation constraint that may not be sorted for a while.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
panfrost: Skip flushes only for wallpapers, not any blit
We need the flush from u_blitter for a normal blit (e.g. for mipmaps);
it's only wallpaper-related blits that are special-cased.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
To avoid interference with the wallpaper code, we need to do some state
tracking when generating mipmaps. In particular, we need to mark the
generated layers as invalid before generating the mipmap, so we don't
try to backblit them if they already had content.
Likewise, we need to flush both before and after generating a mipmap
since our usual set_framebuffer_state flushing isn't quite there yet.
Ideally better optimizations would save the flush but I digress.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
If a mipfilter is not set, it's legal to have an incomplete mipmap; we
should handle this accordingly. An "easy way out" is to rig the LOD
clamps.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
intel/blorp: Disable sampler state prefetching on Gen11
Sampler state prefetching is broken on Gen11, and WA_160668216 says
to disable it. Apparently sampler state prefetching also has basically
zero impact on performance, so we don't need to worry there.
i965, anv, and iris already handle this correctly, but we missed BLORP.
Ideally the kernel should globally disable this by writing SARCHKMD, at
which point we wouldn't have to worry about it. But let's be defensive
and handle it ourselves too.
v2: separate out from BTP workaround in case we change that eventually
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com> [v1]
anv/descriptor_set: Only write texture swizzles if we have an image view
When immutable samplers are set we call write_image_view with a NULL
image view. This causes issues on IVB where we have to fake texture
swizzling.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110999
Fixes: d2aa65eb18 "anv: Emulate texture swizzle in the shader when..."
When set, do as requested and skip any transfer optimization.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Alexandros Frantzis <alexandros.frantzis@collabora.com>
When set, wait after every each flush.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Alexandros Frantzis <alexandros.frantzis@collabora.com>
virgl: fix the value of VIRGL_DEBUG_BGRA_DEST_SWIZZLE
VIRGL_DEBUG_BGRA_DEST_SWIZZLE should use bit 3. Make some cosmetic
changes as well.
Fixes: a478e56fbd
virgl: Add debug flag to bypass driconf to enable the BGRA tweaks
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Alexandros Frantzis <alexandros.frantzis@collabora.com>
SMEM and VMEM caches are L0 on gfx10. Ported from RadeonSI.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radv: set DISABLE_CONSTANT_ENCODE_REG to 1 for Raven2
Ported from RadeonSI, will be emitted for GFX10 too.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radv: clear CMASK layers instead of the whole buffer on GFX8
This reduces the size of fill operations needed to clear CMASK
for layered color textures.
GFX9 unsupported for now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radv: clear FMASK layers instead of the whole buffer on GFX8
This reduces the size of fill operations needed to clear FMASK
for layered color textures.
GFX9 unsupported for now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radv: always initialize levels without DCC as fully expanded
This fixes a rendering issue with RoTR/DXVK.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In case of any enabled VS members from: uses_firstvertex,
uses_baseinstance, uses_drawid, uses_is_indexed_draw
leaks may happens.
Call gen6_upload_push_constants allocates
stage_stat->push_const_bo. It than takes pointer from
push_const_bo to draw_params_bo (in the call
brw_prepare_shader_draw_parameters by brw_upload_data)
and do reference which finally haven't got unreferenced.
Fixes leak:
136 bytes in 1 blocks are definitely lost in loss record 6 of 13
at 0x4C31B25: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0xC2B64B7: bo_alloc_internal (brw_bufmgr.c:596)
by 0xC2B6748: brw_bo_alloc (brw_bufmgr.c:672)
by 0xC314BB3: brw_upload_space (intel_upload.c:88)
by 0xC2EBBC5: gen6_upload_push_constants (gen6_constant_state.c:155)
by 0xC9E4FA6: gen9_upload_vs_push_constants (genX_state_upload.c:3300)
by 0xC2E0EDA: check_and_emit_atom (brw_state_upload.c:540)
by 0xC2E0EDA: brw_upload_pipeline_state (brw_state_upload.c:659)
by 0xC2E0FF1: brw_upload_render_state (brw_state_upload.c:681)
by 0xC2C5D2D: brw_draw_single_prim (brw_draw.c:1052)
by 0xC2C62CB: brw_draw_prims (brw_draw.c:1175)
by 0xC488AD1: vbo_exec_vtx_flush (vbo_exec_draw.c:386)
by 0xC485270: vbo_exec_FlushVertices_internal (vbo_exec_api.c:652)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
st/egl used to support eglCreatePbufferFromClientBuffer, but now that
it's gone, any call to it would segfault.
Let's return a nice error instead.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Nobody ever uses these, so let's just hard code them instead.
If an EGL driver ever comes around that needs them they're trivial to
re-add.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Alyssa Rosenzweig