radv: Add EXT_acquire_xlib_display to radv driver [v2]
This extension adds the ability to borrow an X RandR output for
temporary use directly by a Vulkan application to the radv driver.
v2:
Simplify addition of VK_USE_PLATFORM_XLIB_XRANDR_KHR to
vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
anv: Add EXT_acquire_xlib_display to anv driver [v3]
This extension adds the ability to borrow an X RandR output for
temporary use directly by a Vulkan application to the anv driver.
v2:
Simplify addition of VK_USE_PLATFORM_XLIB_XRANDR_KHR to
vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
v3:
Add extension to list in alphabetical order
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This extension adds the ability to borrow an X RandR output for
temporary use directly by a Vulkan application. For DRM, we use the
Linux resource leasing mechanism.
v2:
Clean up xlib_lease detection
* Use separate temporary '_xlib_lease' variable to hold the
option value to avoid changin the type of a variable.
* Use boolean expressions instead of additional if statements
to compute resulting with_xlib_lease value.
* Simplify addition of VK_USE_PLATFORM_XLIB_XRANDR_KHR to
vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
Move mode list from wsi_display to wsi_display_connector
Fix scope for wsi_display_mode and wsi_display_connector allocs
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
v3:
Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace
between types and names. Wrap lines to 80 columns.
Explicitly forbid multiple DRM leases. Making the code support
this looks tricky and will require additional thought.
Use xcb_randr_output_t throughout the internals of the
implementation. Convert at the public API
(wsi_get_randr_output_display).
Clean up check for usable active_crtc (possible when only the
desired output is connected to the crtc).
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v4:
Move output resource fetching closer to use in
wsi_display_get_output. This simplifies the error returns in
earlier parts of the code a bit.
Return VK_ERROR_INITIALIZATION_FAILED from
wsi_acquire_xlib_display. Jason says this is the right error
message.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v5:
randr doesn't pass vscan over the wire, so we set vscan to 0
for randr-acquired modes, and test wsi modes for vscan <= 1
when comparing against randr modes.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Add support for the EXT_direct_mode_display extension. This just
provides the vkReleaseDisplayEXT function.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
anv: Add EXT_direct_mode_display to anv driver [v2]
Add support for the EXT_direct_mode_display extension. This just
provides the vkReleaseDisplayEXT function.
v2: Add extension to list in alphabetical order
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Add support for the EXT_direct_mode_display extension. This just
provides the vkReleaseDisplayEXT function.
v2:
Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace
between types and names. Wrap lines to 80 columns.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This adds support for the KHR_display extension to the radv Vulkan
driver. The driver now attempts to open the master DRM node when the
KHR_display extension is requested so that the common winsys code can
perform the necessary operations.
v2:
* Simplify addition of VK_USE_PLATFORM_DISPLAY_KHR to
vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
v3:
Adapt to new wsi_device_init API (added display_fd)
v4:
Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace
between types and names. Wrap lines to 80 columns.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v5:
Add vkCreateDisplayModeKHR. This doesn't actually create
new modes, it only looks to see if the requested parameters
matches an existing mode and returns that.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This adds support for the KHR_display extension to the anv Vulkan
driver. The driver now attempts to open the master DRM node when the
KHR_display extension is requested so that the common winsys code can
perform the necessary operations.
v2: Make sure primary fd is usable
When KHR_display is selected, we try to open the primary node
instead of the render node in case the user wants to use
KHR_display for presentation. However, if we're actually going
to end up using RandR leases, then we don't care if the
resulting fd can't be used for display, but the kernel also
prevents us from using it for drawing when someone else has
master.
v3:
Simplify addition of VK_USE_PLATFORM_DISPLAY_KHR to vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
v4:
Adapt primary node usage to new wsi_device_init API
v5:
Adopt Jason Ekstrand's coding conventions
Declare variables at first use, eliminate extra whitespace between
types and names. Wrap lines to 80 columns.
Remove spurious MM_PER_PIXEL define
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v6:
Open DRM master before initializing WSI layer.
The DRM master FD is passed to the WSI layer during
initialization, so we need to open the device slightly earlier
in the function.
Close DRM master in device_finish.
Use anv_gem_get_param to detect working master_fd instead of
directly using the ioctl.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v7:
Add vkCreateDisplayModeKHR. This doesn't actually create
new modes, it only looks to see if the requested parameters
matches an existing mode and returns that.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This adds support for the KHR_display extension support to the vulkan
WSI layer. Driver support will be added separately.
v2:
* fix double ;; in wsi_common_display.c
* Move mode list from wsi_display to wsi_display_connector
* Fix scope for wsi_display_mode andwsi_display_connector
allocs
* Switch all allocations to vk_zalloc instead of vk_alloc.
* Fix DRM failure in
wsi_display_get_physical_device_display_properties
When DRM fails, or when we don't have a master fd
(presumably due to application errors), just return 0
properties from this function, which is at least a valid
response.
* Use vk_outarray for all property queries
This is a bit less error-prone than open-coding the same
stuff.
* Remove VK_COMPOSITE_ALPHA_INHERIT_BIT_KHR from surface caps
Until we have multi-plane support, we shouldn't pretend to
have any multi-plane semantics, even if undefined.
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
* Simplify addition of VK_USE_PLATFORM_DISPLAY_KHR to
vulkan_wsi_args
Suggested-by: Eric Engestrom <eric.engestrom@imgtec.com>
v3:
Add separate 'display_fd' and 'render_fd' arguments to
wsi_device_init API. This allows drivers to use different FDs
for the different aspects of the device.
Use largest mode as display size when no preferred mode.
If the display doesn't provide a preferred mode, we'll assume
that the largest supported mode is the "physical size" of the
device and report that.
v4:
Make wsi_image_state enumeration values uppercase.
Follow more common mesa conventions.
Remove 'render_fd' from wsi_device_init API. The
wsi_common_display code doesn't use this fd at all, so stop
passing it in. This avoids any potential confusion over which
fd to use when creating display-relative object handles.
Remove call to wsi_create_prime_image which would never have
been reached as the necessary condition (use_prime_blit) is
never set.
whitespace cleanups in wsi_common_display.c
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Add depth/bpp info to available surface formats. Instead of
hard-coding depth 24 bpp 32 in the drmModeAddFB call, use the
requested format to find suitable values.
Destroy kernel buffers and FBs when swapchain is destroyed. We
were leaking both of these kernel objects across swapchain
destruction.
Note that wsi_display_wait_for_event waits for anything to
happen. wsi_display_wait_for_event is simply a yield so that
the caller can then check to see if the desired state change
has occurred.
Record swapchain failures in chain for later return. If some
asynchronous swapchain activity fails, we need to tell the
application eventually. Record the failure in the swapchain
and report it at the next acquire_next_image or queue_present
call.
Fix error returns from wsi_display_setup_connector. If a
malloc failed, then the result should be
VK_ERROR_OUT_OF_HOST_MEMORY. Otherwise, the associated ioctl
failed and we're either VT switched away, or our lease has
been revoked, in which case we should return
VK_ERROR_OUT_OF_DATE_KHR.
Make sure both sides of if/else brace use matches
Note that we assume drmModeSetCrtc is synchronous. Add a
comment explaining why we can idle any previous displayed
image as soon as the mode set returns.
Note that EACCES from drmModePageFlip means VT inactive. When
vt switched away drmModePageFlip returns EACCES. Poll once a
second waiting until we get some other return value back.
Clean up after alloc failure in
wsi_display_surface_create_swapchain. Destroy any created
images, free the swapchain.
Remove physical_device from wsi_display_init_wsi. We never
need this value, so remove it from the API and from the
internal wsi_display structure.
Use drmModeAddFB2 in wsi_display_image_init. This takes a drm
format instead of depth/bpp, which provides more control over
the format of the data.
v5:
Set the 'currentStackIndex' member of the
VkDisplayPlanePropertiesKHR record to zero, instead of
indexing across all displays. This value is the stack depth of
the plane within an individual display, and as the current
code supports only a single plane per display, should be set
to zero for all elements
Discovered-by: David Mao <David.Mao@amd.com>
v6:
Remove 'platform_display' bits from the build and use the
existing 'platform_drm' instead.
v7:
Ensure VK_ICD_WSI_PLATFORM_MAX is large enough by
setting to VK_ICD_WSI_PLATFORM_DISPLAY + 1
v8:
Simplify wsi_device_init failure from wsi_display_init_wsi
by using the same pattern as the other wsi layers.
Adopt Jason Ekstrand's white space and variable declaration
suggestions. Declare variables at first use, eliminate extra
whitespace between types and names, add list iterator helpers,
switch to lower-case list_ macros.
Respond to Jason's April 8 review:
* Create a function to convert relative to absolute timeouts
to catch overflow issues in one place
* use VK_NULL_HANDLE to clear prop->currentDisplay
* Get rid of available_present_modes array.
* return OUT_OF_DATE_KHR when display_queue_next called after
display has been released.
* Make errors from mode setting fatal in display_queue_next
* Remove duplicate pthread_mutex_init call
* Add wsi_init_pthread_cond_monotonic helper function to
isolate pthread error handling from wsi_display_init_wsi
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v9:
Fix vscan handling by using MAX2(vscan, 1) everywhere. Vscan
can be zero anywhere, which is treated the same as 1.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
v10:
Respond to Vulkan CTS failures.
1. Initialize planeReorderPossible in display_properties code
2. Only report connected displays in
get_display_plane_supported_displays
3. Return VK_ERROR_OUT_OF_HOST_MEMORY when pthread cond
initialization fails.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
4. Add vkCreateDisplayModeKHR. This doesn't actually create
new modes, it only looks to see if the requested parameters
matches an existing mode and returns that.
Suggested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Probably won't be much different in practice, but still wrong.
Fixes Coverity issue 1435002.
Not CC'ing to stable since this is only hit if you enable MSAA
DCC via RADV_DEBUG.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
freedreno/a5xx: move emit_marker5() into a5xx backend
The scratch registers move again in a6xx.. so for post-a4xx let's just
move this into the backend, and move the one place it used to be needed
in core into fd5_emit_ib(). For a6xx we will do similar, calling
emit_marker6() from fd6_emit_ib().
Signed-off-by: Rob Clark <robdclark@gmail.com>
freedreno/a5xx: fix crash in dEQP-GLES31.stress.vertex_attribute_binding.buffer_bounds.bind_vertex_buffer_offset_near_wrap_10
This is kind of a hack, but really the only problem is the
debug_assert() in OUT_RELOC(). But the debug_assert() is
useful to catch real issues. So just add some #ifdef DEBUG
code to filter things out before we hit the assert.
Signed-off-by: Rob Clark <robdclark@gmail.com>
These never got updated in fd_context_all_dirty() so actually trying to
rely on them (in the case of fd5_emit_images()) ends up in some cases
where state is not emitted but should be. Best to just rip this out.
Signed-off-by: Rob Clark <robdclark@gmail.com>
I think this ends up just setting uniform/const memory. But we upload
x/y/z stride differently. At best this is unneeded, at worst it could
possibly clobber other uniform/const memory.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Unlike textures, this doesn't get lowered for us. (Would be nice
if they were.. at least until we are ready to deal w/ indirect
indexing..)
Signed-off-by: Rob Clark <robdclark@gmail.com>
Run this pass late (after opt loop) to move load_const instructions back
into the basic blocks which use the result, in cases where a load_const
is only consumed in a single block.
This helps reduce register usage in cases where the backend driver
cannot lower the load_const to a uniform.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
mesa/st/nir: fix driver_location for arrays of image/sampler
We can have arrays of images or samplers. But I forgot to handle that
case long ago. Suprised no one complained yet.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Save the next person from digging through the code to figure out what
the indirect_mask parameter actually does.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
AMDVLK uses 64 (distributed) and 16 (non-distributed).
radeonsi will use 63 and 16.
* This might improve tessellation performance on Hawaii, Bonaire, Tahiti,
Pitcairn. (they will use 16)
* I'm not sure if this matters for 1 SE configs.
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
This is the case for the simulator environment, and broke many blitter
tests by trying to texture from linear while the HW can only actually do
UIF/UBLINEAR/LT. Just make a temporary and copy into it with the CPU,
then blit from that.
This is the kind of path that should use the TFU, but I haven't exposed
that hardware yet.
Fixes dEQP-GLES3.functional.fbo.blit.default_framebuffer.*
Some fprintfs were probably left unintentionally a few years ago and are
a bit of a nuisance.
Fixes: 2d3301e4d5 ("virgl: fix reference counting of prime handles")
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The prog->Shaders[i]->IsES check was accidentally removed causing
ES linking rules to be applied to desktop GLSL.
Fixes: 725b1a406d ("mesa/util: add allow_glsl_relaxed_es driconfig override")
This relaxes a number of ES shader restrictions allowing shaders
to follow more desktop GLSL like rules.
This initial implementation relaxes the following:
- allows linking ES shaders with desktop shaders
- allows mismatching precision qualifiers
- always enables standard derivative builtins
These relaxations allow Google Earth VR shaders to compile.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Google Earth VR shaders uses builtins in constant expressions with
GLSL 1.10. That feature wasn't allowed until GLSL 1.20.
Reviewed-by: Dave Airlie <airlied@redhat.com>
util: manually extract the program name from program_invocation_name
Glibc has the same code to get program_invocation_short_name. However
for some reason the short name gets mangled for some wine apps.
For example with Google Earth VR I get:
program_invocation_name:
"/home/tarceri/.local/share/Steam/steamapps/common/EarthVR/Earth.exe"
program_invocation_short_name:
"e"
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
The Vulkan API has only one patch version shared among all of the
major.minor versions. We should also advertise the same patch version
regardless of major.minor.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106941
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Keith Packard