glsl: use remap location when serialising uniform program resource data
This allows us to avoid expensive string compares since we already have
a map to the pointers.
These compares were taking ~30 seconds for a single shader compile
in Godot due to it using 64,000+ uniforms.
Fixes: c4cff5f402 ("glsl: add basic support for resource list to shader cache")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109229
meson.build:166:21: ERROR: Unknown method "verson_compare" for a string.
Fixes: c1efa240c9 ("meson: Add warnings and errors when using ICC")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Cc: 18.3 <mesa-stable@lists.freedesktop.org>
Enable using etnaviv for KMS renderonly. This still needs KMS driver
name mapping to kmsro to be used automatically.
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Herring <robh@kernel.org>
This allows vc4 to initialize on the Adafruit PiTFT 3.5" touchscreen with
the hx8357d tinydrm driver
v2: Whitespace fix noted by Eric Engestrom, update commit message for the
driver being merged.
v3: Rebase on Rob Herring's pipe-loader changes.
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Acked-by: Emil Velikov <emil.velikov@collabora.com> (v1)
pipe-loader: Fallback to kmsro driver when no matching driver name found
If we can't find a driver matching by name, then use the kmsro driver.
This removes the need for needing a driver descriptor for every possible
KMS driver.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Anholt <eric@anholt.net>
The vc4 driver can do prime sharing to many different KMS-only devices,
such as the various tinydrm drivers for SPI-attached displays. Rename the
driver away from "pl111" to represent what it will actually support:
various sorts of KMS displays with the renderonly layer used to attach a
GPU.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
radv: set noalias/dereferenceable LLVM attributes based on param types
Instead of using this useless array_params_mask variable.
This should set these two attributes to streamout buffers too.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
radv: simplify allocating user SGPRS for descriptor sets
Unnecesary to check the current stages if desc_set_used_mask
is used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Use EXT_framebuffer_sRGB to expose EXT_sRGB_write_control on GLES. Remove
the checks for desktion GL in the enable calls, since EXT_framebuffer_sRGB
now also indicates support for switching the linear-sRGB color
space conversion on GLES.
Thanks to Ilia Mirkin for all the helpful discussions that helped to rework
this series.
v2: Fix alphabetical listing of extensions (Tapani Pälli)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
mesa/main/version: Lower the requirements for GLES 3.0
GLES 3.0 does not actually require support for EXT_framebuffer_sRGB, it
only needs support for sRGB attachments to framebuffers and framebuffer
objects as defined in ARB_framebuffer_objects.
v2: Clarify that ARB_framebuffer_objects is needed.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
mesa/main: Use flag for EXT_sRGB instead of EXT_framebuffer_sRGB where possible
All drivers that support EXT_framebuffer_sRGB also support EXT_sRGB, but
in order to keep this commit minial, and not to break any drivers both
flags are checked.
v2: - Use only EXT_sRGB (Ilia Mirkin)
- Move adding the flag EXT_sRGB to gl_extensions to a separate patch
v3: use _mesa_has_EXT_framebuffer_sRGB instead of extension flag
The _mesa_has function also checks for the correct versions and
should be preferred over using the flags directly (Erik)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
mesa/st: rework support for sRGB framebuffer attachements
For GLES sRGB framebuffer attachemnt support is provided in two steps:
sRGB attachments like described in EXT_sRGB (and GLES 3.0) that enable
linear to sRGB color space transformation automatically, and the ability
to switch formats of the render target surface between sRGB and linear
that introduces full support for EXT_framebuffer_sRGB.
Set the according flags to reflect these two levels of sRGB support.
As a difference between desktopm GL and GLES, on desktop GL for a sRGB
framebuffer attachment the linear-sRGB conversion is turned off by default,
and for GLES it is turned on. This needs to be taken into account when
initally creating a surface, i.e. on desktop GL creation of a sRGB surface
is preferred, but on GLES sRGB surfaces are only created when explicitely
requested.
v2: - Use the new CAPS name
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
EXT_sRGB is an (incomplete) GLES extension that provides support for sRGB
framebuffer attachments, hence it can be used to check for this support
as an alternative to EXT_framebuffer_sRGB that provies the same
functionality but also sRGB write control support.
However, since EXT_sRGB is incomplete and superseted by GLES 3.0 it will
not be exposed as an extension.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
virgl: Set sRGB write control CAP based on host capabilities
v2: - Use the renamed CAPS
- add assetions to make sure that mesa doesn't try to switch
destination surface formats when it is not supported. (Ilia Mirkin)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Gallium: Add new CAPS to indicate whether a driver can switch SRGB write
Add a new cap that indicates whether the drivers supports
enabling/disabling the conversion from linear space to sRGB
for a framebuffer attachment. In Driver terms that this CAP indicates
whether the driver can switcht between a linear and and a sRGB surface
format for draw destinations witout changing the sourface itself.
v2: rename CAP to DEST_SURFACE_SRGB_CONTROL to reflect its
purpouse better (pointed out by Ilia Mirkin)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
spirv: Don't use special semantics when counting vertex attribute size
Under Vulkan, the double vertex attributes take up the same size
regardless of whether they are vertex inputs or any other stage
interface.
Under OpenGL (ARB_gl_spirv), from GLSL 4.60 spec, section 4.3.9
Interface Blocks:
"It is a compile-time error to have an input block in a vertex
shader or an output block in a fragment shader. These uses are
reserved for future use."
So we also don't need to check if it is an vertex input or not, and
use false in any case.
v2: (changes made by Alejandro Piñeiro)
* Update required after "spirv: Handle location decorations on
block interface members" own updates (original patch was sent
several months ago)
* After Neil suggesting it, confirm that this change can be also
done for OpenGL (ARB_gl_spirv). Expand commit message.
v3: update after changing name of main method on a previous patch
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
glsl_types: Rename parameter of glsl_count_attribute_slots
glsl_count_attribute_slots takes a parameter to specify whether the
type is being used as a vertex input because on GL double attributes
only take up one slot. Vulkan doesn’t make this distinction so this
patch renames the argument to is_gl_vertex_input in order to make it
more clear that it should always be false on Vulkan.
v2: minor variable renaming (s/member/member_type) (Tapani)
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
spirv/nir: handle location decorations on block interface members
Previously the code was taking any location decoration on the block
and using that to calculate the member locations for all of the
members. I think this was assuming that there would only be one
location decoration for the entire block. According to the Vulkan spec
it is possible to add location decorations to individual members:
“If the structure type is a Block but without a Location, then each
of its members must have a Location decoration. If it is a Block
with a Location decoration, then its members are assigned
consecutive locations in declaration order, starting from the
first member which is initially the Block. Any member with its own
Location decoration is assigned that location. Each remaining
member is assigned the location after the immediately preceding
member in declaration order.”
This patch makes it instead keep track of which members have been
assigned an explicit location. It also has a space to store the
location for the struct as a whole. Once all the decorations have been
processed it iterates over each member to fill in the missing
locations using the rules described above.
So, this commit is needed to get working a case like this, on both
Vulkan and OpenGL using SPIR-V (ARB_gl_spirv):
out block {
layout(location = 2) vec4 c;
layout(location = 3) vec4 d;
layout(location = 0) vec4 a;
layout(location = 1) vec4 b;
} name;
v2: (changes made by Alejandro Piñeiro)
* Update after introducing struct member splitting (See commit b0c643d)
* Update after only exposing interface_type for blocks, not to any struct
* Update after last changes done for xfb support
v3: use "assign" instead of "add" on the new method added (Tapani)
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
etnaviv: extend etna_resource with an addressing mode
Defines how sampler (and pixel pipes) needs to access the data
represented with a resource. The used default is mode is
ETNA_ADDRESSING_MODE_TILED.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
The text segment is shared among multiple contexts, while each one has
its own bufctx. So when reallocating the text segment, some contexts may
end up with stale values in their bufctx's. Instead limit the exposure
to the bufctx to within a single draw.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
v3d: Create separate sampler states for the various blend formats.
The sampler border color is encoded in the TMU's blending format (half
floats, 32-bit floats, or integers) and must be clamped to the format's
range unorm/snorm/int ranges by the driver. Additionally, the TMU doesn't
know about how we're abusing the swizzle to support BGRA, A, and LA, so we
have to pre-swizzle the border color for those.
We don't really want to spend half a kb on sampler states in most cases,
so skip generating the variants when the border color is unused or is
0,0,0,0.
v3d: Fix stencil sampling from a separate-stencil buffer.
When the sampler view is in sample-stencil mode, we need to return uint
stencil values. To do that, fill in the format table to return R8I, and
have the sampler view point at the separate stencil buffer.
Fixes dEQP-GLES31.functional.stencil_texturing.format.depth32f_stencil8_2d
v3d: Flush blit jobs immediately after generating them.
Fixes OOMs in the CTS's packed_pixels.varied_rectangle.* tests -- the
series of texture uploads at the start before texturing occurred would end
up all sitting around as cached jobs for reuse. By flushing immediately,
peak active BO usage goes from 150M to 40M.
We could maybe put some limits on how many jobs we keep around, but blits
seem particularly unlikely to get reused for other drawing.
v3d: Drop maximum number of texture units down to 16.
This is the GLES 3.2 minmax, and also what the closed source driver does.
Avoids hitting OOMs in the CTS's
dEQP-GLES3.functional.texture.units.all_units.only_cube.1.
From the vulkan spec 33.3 "Extension Dependencies":
"Any device extension that has an instance extension dependency that is
not enabled by vkCreateInstance is considered to be unsupported, hence
it must not be returned by vkEnumerateDeviceExtensionProperties for any
VkPhysicalDevice child of the instance."
Therefore we need to check whether the instance-level extensions are
actually enabled when deciding to support a device-level extension or
not.
Furthermore, we need to do this for all instance-level extensions of any
(transitive) device-level extension dependency, due to the following
paragraph:
"If an extension is supported (as queried by
vkEnumerateInstanceExtensionProperties or
vkEnumerateDeviceExtensionProperties), then required extensions of that
extension must also be supported for the same instance or physical
device."
Finally, because some of these vulkan extensions may be implicitly
promoted to future vulkan core API versions, we can also satisfy the
dependency if the vulkan API version is high enough.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
From the vulkan spec 3.2 "Instances":
"Providing a NULL VkInstanceCreateInfo::pApplicationInfo or providing an
apiVersion of 0 is equivalent to providing an apiVersion of
VK_MAKE_VERSION(1,0,0)."
Fixes: ffa15861ef "radv: UseEnumerateInstanceVersion for the default version."
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
glsl: fix block member alignment validation for vec3
Section 7.6.2.2 (Standard Uniform Block Layout) of the GL spec says:
The base offset of the first member of a structure is taken from the
aligned offset of the structure itself. The base offset of all other
structure members is derived by taking the offset of the last basic
machine unit consumed by the previous member and adding one.
The current code does not reflect this last sentence - it effectively
instead aligns up the next offset up to the alignment of the previous
member. This causes an issue in exactly one case:
layout(std140) uniform block {
layout(offset=0) vec3 var1;
layout(offset=12) float var2;
};
As per section 7.6.2.1 (Uniform Buffer Object Storage) and elsewhere, a
vec3 consumes 3 floats, i.e. 12 basic machine units. Therefore, `var1`
in the example above consumes units 0-11, with 12 being the first
available offset afterwards. However, before this commit, mesa
incorrectly assumes `var2` must start at offset=16 when using explicit
offsets, which results in a compile-time error. Without explicit
offsets, the shaders actually work fine, indicating that mesa is already
correctly aligning these fields internally. (Just not in the code that
handles explicit buffer offset parsing)
This patch should fix piglit tests:
ssbo-explicit-offset-vec3.vert
ubo-explicit-offset-vec3.vert
Signed-off-by: Niklas Haas <git@haasn.xyz>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
spirv: Implement OpConvertPtrToU and OpConvertUToPtr
This only implements the actual opcodes and does not implement support
for using them with specialization constants.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We handle forward declarations by creating the pointer type with it's
storage type based on storage class and just waiting to fill out the
actual deref type until we get the OpTypePointer. Because any
composites using the forward declared type only care about the storage
type (i.e. uint64_t, uvec2, etc.) when creating their glsl_type, this
works fine and we can defer the actual deref_type as far as we need.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
This was valid back when the only valid types of pointers were uint32
and uvec2. Now that we're allowing more variety, it could be just about
anything so we'll just drop the assert.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Jonathan Marek