gallium: set pipe_context uploaders in drivers (v3)
Notes:
- make sure the default size is large enough to handle all state trackers
- pipe wrappers don't receive transfer calls from stream_uploader, because
pipe_context::stream_uploader points directly to the underlying driver's
stream_uploader (to keep it simple for now)
v2: add error handling to nv50, nvc0, noop
v3: set const_uploader
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com> (v1)
Tested-by: Charmaine Lee <charmainel@vmware.com>
gallium: add common uploaders into pipe_context (v2)
For lower memory usage and more efficient updates of the buffer residency
list. (e.g. if drivers keep seeing the same buffer for many consecutive
"add" calls, the calls can be turned into no-ops trivially)
v2: add const_uploader, add documentation
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Tested-by: Charmaine Lee <charmainel@vmware.com>
This ports the remains of the workarounds from radeonsi for
the non-TESS cases. It should provide equivalent workarounds
for hawaii and bonarie.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
radv: adopt some init config workarounds from radeonsi.
Just one bonaire fix.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Once the color alignment was fixed this works fine now.
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the padding to align this to an 8 dword boundary.
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just a CIK fix ported from radeonsi.
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
On some CIK (Hawaii) this needs to be at least 64k, I'm not 100% sure
it doesn't need to be 128k.
This was causing fast clear eliminate to overwrite the previous buffer,
which since my gfx init code, was the indirect buffer.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99692
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
anv: Add support for shaderStorageImageWriteWithoutFormat
This allows shaders to write to storage images declared with unknown
format if they are decorated with NonReadable ("writeonly" in GLSL).
Previously an image view would always use a lowered format for its
surface state, however when a shader declares a write-only image, we
should use the real format. Since we don't know at view creation time
whether it will be used with only write-only images in shaders, create
two surface states using both the original format and the lowered
format. When emitting the binding table, choose between the states
based on whether the image is declared write-only in the shader.
Tested on both Sascha Willems' computeshader sample (with the original
shaders and ones modified to declare images writeonly and omit their
format qualifiers) and on our own shaders for which we need support
for this.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
spirv: Add support for SpvCapabilityStorageImageWriteWithoutFormat
Allow that capability if the driver indicates that it is supported, and
flag whether images are read-only/write-only in the nir_variable (based
on the NonReadable and NonWritable decorations), which drivers may need
to implement this.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
nir/spirv: do not require a format with images that are not sampled
As soon as we support shaderStorageImageWriteWithoutFormat we can see
write-only images (sampled == 2) that don't have a format specified.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
anv/apply_pipeline_layout: Set image.write_only to false
This makes our driver robust to changes in spirv_to_nir which would set
this flag on the variable. Right now, our driver relies on spirv_to_nir
*not* setting var->data.image.write_only for correctness. Any patch
which implements the shaderStorageImageWriteWithoutFormat will need to
effectively revert this commit.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
intel/isl: Add format metadata for typed reads/writes
This adds two columns to the format table as well as two helpers for
determining whether or not a given format is supported for typed reads
and writes.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
nvc0: disable linked tsc mode in compute launch descriptor
Empirically, this makes things work. Presumably this was originally
copied from the blob, which does make use of linked tsc mode.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99532
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
mesa: Add EXT_frag_depth bits and enable it on all drivers
Passes the newly added piglit test for this extension on i965.
V2: Fix comments by Ilia.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This just ports radeonsi to use the sendmsg common code.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the common code to emit the correct intrinsic.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This lets us use the new intrinsic on the correct
version of llvm.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just fixes this without repeating the code.
Reported-by: Li Qiang
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
radv/ac: use common interp code for new intrinsics
This uses the common fs interp code to use the new
llvm intrinsics so llvm can drop the old ones.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This puts the common gfx state for the device into an
indirect buffer, and just calls out to it, on CIK and above.
This is taken from what radeonsi does.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is just prep work for the following patch to use
a common gfx init indirect buffer.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
radv: detect command buffers that do no work and drop them (v2)
If a buffer is just full of flushes we flush things on command
buffer submission, so don't bother submitting these.
This will reduce some CPU overhead on dota2, which submits a fair
few command streams that don't end up drawing anything.
v2: reorganise loop to count first then malloc,
rename some vars (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
anv/blorp: Don't sanitize the swizzle for blorp_clear
BLORP is now smart enough to handle any swizzle (even those that contain
ZERO or ONE) in a reasonable manner. Just let BLORP handle it. This
fixes the following Vulkan CTS tests on Haswell:
- dEQP-VK.api.image_clearing.clear_color_image.1d_b4g4r4a4_unorm_pack16
- dEQP-VK.api.image_clearing.clear_color_image.2d_b4g4r4a4_unorm_pack16
- dEQP-VK.api.image_clearing.clear_color_image.3d_b4g4r4a4_unorm_pack16
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
It's trivial to swizzle clear colors on the CPU, easily deals with the
hardware restrictions for render target swizzles, and makes swizzled
clears work on all hardware as opposed to just HSW+.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Released back in 2007 so it should not be an issue for anyone building
from git.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
DRI2DriverPrimeShift was added in dri2proto-2.8, which we now require
as of the previous commit.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
DRI2DriverPrimeShift was added in dri2proto-2.8, which we now require as
of the previous commit.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Noticed while skimming through, although admittedly there's many other
dependencies that are not tracked by the scons build.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
dri2proto 2.8 was released 4+ years ago, so it must be of no surprise
for anyone building mesa from git.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The two symbols referenced were introduced with v2.2 and 2.3 of
the dri2proto package and we require dri2proto >= 2.6.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
configure.ac: do not use deprecated macros - AC_HELP_STRING AC_ERROR
Replace with AS_HELP_STRING and AC_MSG_ERROR respectively, as spotted by
autoupdate.
Note that the suggested AC_CANONICAL_SYSTEM > AC_CANONICAL_TARGET change
is not addressed here since that requires very extensive testing.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
I forgot to error check stat() and also I wasn't using the subdir in
is_two_character_sub_directory().
Fixes: d7b3707c61 "util/disk_cache: use stat() to check if entry is a directory"
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
configure.ac: Drop LLVM compiler flags more radically
Drop all -m*, -W*, -O*, -g* and -f* flags, with the exception of
-fno-rtti, which must be used if it's part of the llvm-config --cxxflags
output. We don't want LLVM to dictate the flags we use, and it can even
cause build failures, e.g. if LLVM and Mesa are built with different
compilers.
While we're at it, eat any whitespace preceding dropped flags as well.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
TCS and TES inputs without an array size are implicitly sized to
gl_MaxPatchVertices. But TCS outputs are apparently not:
"If no size is specified, it will be taken from the output patch size
(gl_VerticesOut) declared in the shader."
Fixes dEQP-GLES31.functional.program_interface_query.program_output.
array_size.separable_tess_ctrl.var.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Marek Olšák