Lower load_output to txf_ms_fb and add support for the new texture fetch
instruction.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Needed for sampling from tile buffer (GMEM).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
nir: fix lower_wpos_ytransform in load_frag_coord case
Apparently we never hit this path. Or at least haven't for a rather
long time. But in either case (load_deref or load_frag_coord), we can
just directly use the intrinsic's ssa dest. So stop passing the
nir_variable (which would be NULL in the load_frag_coord case) around
and instead just use &intr->dest.ssa.
(This ofc means we need to setup the cursor to insert *after* the
instruction, which seems to be another bug of the original
implementation.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
The extra comma at the end was annoying me.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
And a comment.. since we are mixing units of bytes/dwords/vec4,
hopefully this will avoid some unit confusion.
Signed-off-by: Rob Clark <robdclark@chromium.org>
freedreno/ir3: add IR3_SHADER_DEBUG flag to disable ubo lowering
It isn't quite as simple as not running the pass, since with packed
varyings we get load_ubo for block==0 (ie. the "real" uniforms). So
instead run the pass normally but decline to lower anything in
block > 0
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since we emit UBO regions INDIRECTly (ie. not copied into cmdstream but
emit by EXT_SRC_ADDR) we need to keep them 4*vec4 aligned. Which the
code already mostly did, except for aligning the first UBO region itself
(ie. the one after block==0 which is the "real" uniforms).
Fixes: 893425a607 freedreno/ir3: Push UBOs to constant file
Fixes: 3c8779af32 freedreno/ir3: Enable PIPE_CAP_PACKED_UNIFORMS
Signed-off-by: Rob Clark <robdclark@chromium.org>
freedreno/ir3: fix shader variants vs UBO analysis
Otherwise we zero out the state again, but all the UBO loads that we
could lower are already lowered. End result is that we didn't emit the
uniforms for lowered UBO access in any case where multiple shader
variants are used.
Fixes: 893425a607 freedreno/ir3: Push UBOs to constant file
Fixes: 3c8779af32 freedreno/ir3: Enable PIPE_CAP_PACKED_UNIFORMS
Signed-off-by: Rob Clark <robdclark@chromium.org>
Keen on having other people contribute.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
This is useful to normalize the numbers written into the output file
as those number are accumulated over a period of time and number of
frames.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
vulkan/overlay: add pipeline statistic & timestamps support
v2: switch to VkBase{In,Out}Structure
v3: Add timestamps at begin/end of primary command buffers to estimate
gpu time spent per submission (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v2)
vulkan/overlay: record stats in command buffers and accumulate on exec/submit
This significantly reworks how numbers displayed are computed. We
accumulate operations written into command buffers and add those to
the device when submitted to a queue. These collected values are then
used to compute per frame overlay data.
We also accumulate the data over the sampling fps period to produce
numbers for that period of time.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
vulkan/util: generate a helper function to return pNext struct sizes
This will be used to copy chains of structures so that we can alterate
some of them.
v2: Drop vk_util.h include (Eric)
Use VkBaseInStructure directly (Eric)
v3: Drop --platforms= param to generator script, instead produce a
file with #ifdef based what platforms are compiled.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
egl: hard-code destroy function instead of passing it around as a pointer
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
nir_opt_algebraic is currently one of the most expensive NIR passes,
because of the many different patterns we've added over the years. Even
though patterns are already sorted by opcode, there are still way too
many patterns for common opcodes like bcsel and fadd, which means that
many patterns are tried but only a few actually match. One way to fix
this is to add a pre-pass over the code that scans it using an automaton
constructed beforehand, similar to the automatons produced by lex and
yacc for parsing source code. This automaton has to walk the SSA graph
and recognize possible pattern matches.
It turns out that the theory to do this is quite mature already, having
been developed for instruction selection as well as other non-compiler
things. I followed the presentation in the dissertation cited in the
code, "Tree algorithms: Two Taxonomies and a Toolkit," trying to keep
the naming similar. To create the automaton, we have to perform
something like the classical NFA to DFA subset construction used by lex,
but it turns out that actually computing the transition table for all
possible states would be way too expensive, with the dissertation
reporting times of almost half an hour for an example of size similar to
nir_opt_algebraic. Instead, we adopt one of the "filter" approaches
explained in the dissertation, which trade much faster table generation
and table size for a few more table lookups per instruction at runtime.
I chose the filter which resulted the fastest table generation time,
with medium table size. Right now, the table generation takes around .5
seconds, despite being implemented in pure Python, which I think is good
enough. Based on the numbers in the dissertation, the other choice might
make table compilation time 25x slower to get 4x smaller table size, but
I don't think that's worth it. As of now, we get the following binary
size before and after this patch:
text data bss dec hex filename
11979455 464720 730864 13175039 c908ff before i965_dri.so
text data bss dec hex filename
12037835 616244 791792 13445871 cd2aef after i965_dri.so
There are a number of places where I've simplified the automaton by
getting rid of details in the LHS patterns rather than complicate things
to deal with them. For example, right now the automaton doesn't
distinguish between constants with different values. This means that it
isn't as precise as it could be, but the decrease in compile time is
still worth it -- these are the compilation time numbers for a shader-db
run with my (admittedly old) database on Intel skylake:
Difference at 95.0% confidence
-42.3485 +/- 1.375
-7.20383% +/- 0.229926%
(Student's t, pooled s = 1.69843)
We can always experiment with making it more precise later.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
radv: set WD_SWITCH_ON_EOP=1 when drawing primitives from a stream output buffer
According to RadeonSI, this seems to be required by the hardware
to avoid GPU hangs. I think I just forgot to set that bit when I
implemented VK_EXT_transform_feedback.
This fixes a GPU hang with Space Engineers and DXVK.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110291
Fixes: b4eb029062 ("radv: implement VK_EXT_transform_feedback")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
valgrind crashes when we try to initialize host logging. This
env var can be used to disable logging.
v2: rebase onto "svga: move host logging to winsys".
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Neha Bhende <bhenden@vmware.com>
This patch adds a host_log interface to svga_winsys and
moves the host logging code to the winsys layer.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
If the client has requested that AcquireNextImage not block at all, with
a timeout of 0, then don't make any non-blocking calls.
This will still potentially block infinitely given a non-infinte
timeout, but the fix for that is much more involved.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: mesa-stable@lists.freedesktop.org
Cc: Chad Versace <chadversary@chromium.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108540
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
All other pages has the heading as ghe first thing in the article. Let's
clean this up for consistency.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
The FAQ is the only article we have that uses a centered heading, which
makes it look odd compared to the other articles. Let's drop the
centering for consistency.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
HTML already have a way of doing automatically ordered lists, so let's
use that instead of open-coding one.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
The list items needs to contain everything part of the item, not just
the first paragraph.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
This markup seems to assume paragraphs survive across block-elements,
which isn't the case. Let's rectify that.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
It's illegal to nest block-level elements such as <pre> inside <p> in
HTML. This means that when the paragraphs gets closed after a <pre>-tag,
we end up closing a non-existent tag, so the browser inserts a dummy
<p>-tag. This is entirely pointless, so let's just close these tags
before the <pre>-tag instead.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
This isn't matching any paragraph-open tags, so let's get rid of it.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
These lists never got closed. Let's fix that to avoid issues with bad
parsers.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
paragraphs can't contain lists, and attempting to close them after
the list just cause an extra, empty paragraph to be created. We don't
want that, so let's close the paragraphs before the list intead.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Rob Clark