i965: Unify vertex buffer setup

On gen >= 8 one doesn't provide ending address but number of bytes
available. This is relative to the given offset.

Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

src/mesa/drivers/dri/i965/brw_draw_upload.c

@@ -708,7 +708,9 @@ brw_emit_vertex_buffer_state(struct brw_context *brw,
    struct gl_context *ctx = &brw->ctx;
    uint32_t dw0;
 
-   if (brw->gen >= 6) {
+   if (brw->gen >= 8) {
+      dw0 = buffer_nr << GEN6_VB0_INDEX_SHIFT;
+   } else if (brw->gen >= 6) {
       dw0 = (buffer_nr << GEN6_VB0_INDEX_SHIFT) |
             (step_rate ? GEN6_VB0_ACCESS_INSTANCEDATA
                        : GEN6_VB0_ACCESS_VERTEXDATA);
@@ -721,15 +723,35 @@ brw_emit_vertex_buffer_state(struct brw_context *brw,
    if (brw->gen >= 7)
       dw0 |= GEN7_VB0_ADDRESS_MODIFYENABLE;
 
-   if (brw->gen == 7)
+   switch (brw->gen) {
+   case 7:
       dw0 |= GEN7_MOCS_L3 << 16;
+      break;
+   case 8:
+      dw0 |= BDW_MOCS_WB << 16;
+      break;
+   case 9:
+      dw0 |= SKL_MOCS_WB << 16;
+      break;
+   }
 
    WARN_ONCE(stride >= (brw->gen >= 5 ? 2048 : 2047),
              "VBO stride %d too large, bad rendering may occur\n",
              stride);
    OUT_BATCH(dw0 | (stride << BRW_VB0_PITCH_SHIFT));
-   OUT_RELOC(bo, I915_GEM_DOMAIN_VERTEX, 0, start_offset);
-   if (brw->gen >= 5) {
+   if (brw->gen >= 8) {
+      OUT_RELOC64(bo, I915_GEM_DOMAIN_VERTEX, 0, start_offset);
+      /* From the BSpec: 3D Pipeline Stages - 3D Pipeline Geometry -
+       *                 Vertex Fetch (VF) Stage - State
+       *
+       * Instead of "VBState.StartingBufferAddress + VBState.MaxIndex x
+       * VBState.BufferPitch", the address of the byte immediately beyond the
+       * last valid byte of the buffer is determined by
+       * "VBState.StartingBufferAddress + VBState.BufferSize".
+       */
+      OUT_BATCH(end_offset - start_offset);
+   } else if (brw->gen >= 5) {
+      OUT_RELOC(bo, I915_GEM_DOMAIN_VERTEX, 0, start_offset);
       /* From the BSpec: 3D Pipeline Stages - 3D Pipeline Geometry -
        *                 Vertex Fetch (VF) Stage - State
        *
@@ -739,10 +761,12 @@ brw_emit_vertex_buffer_state(struct brw_context *brw,
        *  "VBState.EndAddress + 1".
        */
       OUT_RELOC(bo, I915_GEM_DOMAIN_VERTEX, 0, end_offset - 1);
+      OUT_BATCH(step_rate);
    } else {
+      OUT_RELOC(bo, I915_GEM_DOMAIN_VERTEX, 0, start_offset);
       OUT_BATCH(0);
+      OUT_BATCH(step_rate);
    }
-   OUT_BATCH(step_rate);
 
    return __map;
 }

src/mesa/drivers/dri/i965/gen8_draw_upload.c

@@ -52,7 +52,6 @@ static void
 gen8_emit_vertices(struct brw_context *brw)
 {
    struct gl_context *ctx = &brw->ctx;
-   uint32_t mocs_wb = brw->gen >= 9 ? SKL_MOCS_WB : BDW_MOCS_WB;
    bool uses_edge_flag;
 
    brw_prepare_vertices(brw);
@@ -141,35 +140,29 @@ gen8_emit_vertices(struct brw_context *brw)
       BEGIN_BATCH(1 + 4 * nr_buffers);
       OUT_BATCH((_3DSTATE_VERTEX_BUFFERS << 16) | (4 * nr_buffers - 1));
       for (unsigned i = 0; i < brw->vb.nr_buffers; i++) {
-         struct brw_vertex_buffer *buffer = &brw->vb.buffers[i];
-         uint32_t dw0 = 0;
-
-         dw0 |= i << GEN6_VB0_INDEX_SHIFT;
-         dw0 |= GEN7_VB0_ADDRESS_MODIFYENABLE;
-         dw0 |= buffer->stride << BRW_VB0_PITCH_SHIFT;
-         dw0 |= mocs_wb << 16;
-
-         OUT_BATCH(dw0);
-         OUT_RELOC64(buffer->bo, I915_GEM_DOMAIN_VERTEX, 0, buffer->offset);
-         OUT_BATCH(buffer->size);
+         const struct brw_vertex_buffer *buffer = &brw->vb.buffers[i];
+         EMIT_VERTEX_BUFFER_STATE(brw, i, buffer->bo,
+                                  buffer->offset,
+                                  buffer->offset + buffer->size,
+                                  buffer->stride, 0 /* unused */);
       }
 
       if (uses_draw_params) {
-         OUT_BATCH(brw->vb.nr_buffers << GEN6_VB0_INDEX_SHIFT |
-                   GEN7_VB0_ADDRESS_MODIFYENABLE |
-                   mocs_wb << 16);
-         OUT_RELOC64(brw->draw.draw_params_bo, I915_GEM_DOMAIN_VERTEX, 0,
-                     brw->draw.draw_params_offset);
-         OUT_BATCH(brw->draw.draw_params_bo->size);
+         EMIT_VERTEX_BUFFER_STATE(brw, brw->vb.nr_buffers,
+                                  brw->draw.draw_params_bo,
+                                  brw->draw.draw_params_offset,
+                                  brw->draw.draw_params_bo->size,
+                                  0 /* stride */,
+                                  0 /* unused */);
       }
 
       if (brw->vs.prog_data->uses_drawid) {
-         OUT_BATCH((brw->vb.nr_buffers + 1) << GEN6_VB0_INDEX_SHIFT |
-                   GEN7_VB0_ADDRESS_MODIFYENABLE |
-                   mocs_wb << 16);
-         OUT_RELOC64(brw->draw.draw_id_bo, I915_GEM_DOMAIN_VERTEX, 0,
-                     brw->draw.draw_id_offset);
-         OUT_BATCH(brw->draw.draw_id_bo->size);
+         EMIT_VERTEX_BUFFER_STATE(brw, brw->vb.nr_buffers + 1,
+                                  brw->draw.draw_id_bo,
+                                  brw->draw.draw_id_offset,
+                                  brw->draw.draw_id_bo->size,
+                                  0 /* stride */,
+                                  0 /* unused */);
       }
       ADVANCE_BATCH();
    }